OLDBOOK • FATBOOK • INDIAN • STREET • OFFROAD • ATV/UTV • SNOWMOBILE • WATERCRAFT • TIRE & SERVICE • HELMET & APPAREL • BICYCLE Making A Great 2023 Season Even Better! The 2023 Drag Specialties/Parts Unlimited Update catalog adds more powersports excitement to your countertop! The FatBook, OldBook and Indian sections feature new parts and accessories for American V-Twin motorcycles. The Street, Offroad,ATV/UTV, Snow and Watercraft sections have new parts and accessories for each market segment.The Bicycle market is growing fast! We have a section exclusively for the E-MTB market. The Helmet & Apparel section showcases the latest riding gear and casuals. The Tire & Service section features the market’s newest tires and the tools, chems and lubes to keep the shop or garage supplied so every machine is running in top condition. Use the update catalog along with your current Drag Specialties and Parts Unlimited catalogs to keep a great 2023 sales season going strong! Parts Unlimited and Drag Specialties – Supporting the dealer, the customer and the entire sport! All model designations and applications used herein are determined by the manufacturers as USA-specific. Contact the individual manufacturer for additional international model information. OldBook..................... 3-19 FatBook................... 20-109 Indian.................... 110-116 Street. ................... 117-149 Offroad................... 150-241 ATV/UTV................... 242-279 Snow.....................280-307 Watercraft................. 308-313 Bicycle....................314-319 Helmet & Apparel. ...........320-505 Tire & Service.............. 506-529 Index.................... 530-546 Table Of Contents 2 WE SUPPORT THE SPORT®
3 Update
4 IMPORTANT INFORMATION: EMISSIONS REGULATIONS NOTE: The California Air Resources Board (“CARB”) does not permit the use of aftermarket emissions-related part(s) that alter the performance of OEM emissions-related devices unless CARB has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer’s information. More California exhaust information is available at www.arb.ca.gov/. NOTE: Parts designated as “Race Only” are for use only on vehicles used for competition racing and are not for use on vehicles registered for use on public roads. Sale and/or installation of “Race Only” parts in any way inconsistent with this warning is prohibited and may result in enforcement by the U.S. EPA under the federal Clean Air Act. “RACE ONLY” PARTS ARE NOT LEGAL FOR SALE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES NOTE: Aftermarket products, including but not limited to exhausts, catalytic converters, oxygen sensors, fuel/a ir controller modules, air filter kits, camshafts, O2 eliminators, and carburetors and jet kits which alter, modify, or replace emission control devices or systems of an originally compliant highway motorcycle, are not legal for sale or street use in California unless they have been issued a CARB Executive Order. Aftermarket emissions-related products which have not been issued an Executive Order or which are not aftermarket Replacement Parts, as defined in Title 13, California Code of Regulations, Section 1900(b)(2), are authorized for closed circuit race use only. Products shown may be designed, manufactured, intended and sold for closed circuit race use only and use of the same on public roads or lands may be a violation of local, state and/or federal laws. See manufacturer’s information and state and local laws to determine what is authorized for your use on your vehicle. The following emissions-related defined terms are used in this catalog (PARTS WITH THE FOLLOWING DESIGNATIONS IN THIS CATALOG ARE NOT ILLEGAL FOR SALE IN CALIFORNIA UNDER CARB REGULATIONS): • “CARB E.O.” means the specified Executive Order issued by CARB. An Executive Order constitutes an exemption by CARB from CA Vehicle Code 27156 and 38391, for sale of the part number for the make/m odel/year fitment(s) specified in the Executive Order. • “Replacement Part” means any aftermarket part intended to replace an original equipment emissions-related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part. • “Qualified Manufacturer Declared Replacement Part” means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/m odel/year fitment(s) advertised. In addition, for 49-State compliance, the following term applies: • “Qualified Manufacturer Declared 49-State Federal Emissions Compliant Part” (Not legal for sale or use in California) means any aftermarket part intended to replace an original equipment emissions-related part and that meets all EPA emission regulations by installing the element of design in all emissions-related respects to the certified configuration of the vehicle, engine, or piece of equipment. This manufacturer has declared in writing that it has fully documented the emissions testing of an appropriate test vehicle, engine, or piece of equipment that had been identically altered and that the part meets all applicable emissions standards for that make/model/year fitment(s) advertised.
5 IMPORTANT INFORMATION: SALES OF RACE ONLY PARTS The federal Environmental Protection Agency’s policies related to tampering and defeat devices are publicly available at the following sites: https://www.epa.gov/sites/production/files/2020-12/documents/ epatamperingpolicy-enforcementpolicyonvehicleandenginetampering.pdf https://www.epa.gov/sites/production/files/2020-12/documents/ tamperinganddefeatdevices-enfalert.pdf https://www.epa.gov/sites/production/files/2021-01/ documents/caatitleiivehicleenginepenaltypolicy011821.pdf The EPA has taken civil and criminal enforcement action against companies and individuals for violations of the Clean Air Act’s tampering and defeat device prohibitions. By ordering “Race Only” parts from LeMans Corporation, d/b/a Parts Unlimited® and Drag Specialties® (“LeMans”), you, as the selling retailer, expressly acknowledge and assume all the responsibility for ensuring and documenting information to verify that the sale or installation of every “Race Only” part is for competition racing vehicle use only. Examples of such documentation include: • Require that the buyer of the part(s) sign an acknowledgement that the part is for “Race Use Only.” The acknowledgement would contain enough information (i.e., invoice number, purchase date, purchaser name, part number, etc.) to be able to track the part to its ultimate installation. • Evidence that the vehicle is not registered in any State for highway use. • The detailed owner or operator information and vehicle VIN are recorded. • The vehicle is being used in only closed course competition events like King of the Baggers®, BRL Bagger Racing League®, SUPER HOOLIGAN®, AMA FLAT TRACK®, or one of the hundreds of similar competition racing use only events throughout the US (road race, flat track, drag racing and land speed). If you have questions regarding the information that you should collect as evidence that the part purchased from LeMans and sold or installed by you/your company will be used only on a “Race Only” vehicle as intended, please refer to your legal counsel or racing trade association. This notice is a material condition of LeMans’ willingness to sell the product to you. By accepting the terms: 1. You are solely responsible to verify and document that use of “Race Only” parts will be limited to competition racing use consistent with the terms of this notice on each individual sales transaction; 2. You will provide LeMans with copies of the documentation that shows evidence of the use of “Race Only” parts purchased from LeMans upon request; and 3. You consent to the disclosure of your identity to any governmental entity responsible for regulating emissions and/or enforcing emissions laws, if requested. NOISE REGULATIONS A number of jurisdictions/states have exhaust noise laws. Exhaust products advertised might not be legal for sale or use on highway vehicles in such jurisdictions/states. Check applicable laws and regulations.
BLUE part numbers are new for 2023 PARTS-UNLIMITED.COM 2022-2023 | OLDBOOK UPDATE AUDIO, COMMUNICATION & MOUNTS SECTION 2 OLDBOOK 6 PART # COLOR SUG. RETAIL 0636-0287 Black $25.99 TRIM LINE ARM KIT FOR CYBERCHARGER® •Slim design that won’t interfere with the buttons on the side of your smartphone •Premium wings and support leg have integrated rubber damping and provide a non-slip grip •Support leg allows for height adjustments to fit any device •Easy installation • Cybercharger® phone holder sold separately PART # COLOR SUG. RETAIL FOR ALL 96-99 H-D MODEL CLUTCH/BRAKE PERCH MOUNTS 0636-0334 Chrome $32.99 0636-0335 Black 32.99 OFFSET PERCH MOUNT • Allows for your phone or drink holder to be offset 2” from your hand controls (Drink and phone holder sold separately) •Easy installation • Can be mounted on left or right side, right side up or upside down •Made of diecast aluminum NOTE: Does not work with 88-95 H-D models equipped with cruise control or PPT switches attached to the perch. 0636-0334 0636-0335
BLUE part numbers are new for 2023 AUDIO, COMMUNICATION & MOUNTS DRAGSPECIALTIES.COM OLDBOOK UPDATE | 2022-2023 SECTION 2 OLDBOOK 7 PART # DESCRIPTION SUG. RETAIL 0636-0288 Case for iPhone® 14 Pro case $39.99 0636-0289 Case for iPhone® 14+ 39.99 0636-0290 Case for iPhone® 14 Pro Max 39.99 0636-0291 Case for iPhone® 12/13 Mini 39.99 0636-0292 Case for iPhone® 13/14 39.99 0636-0293 Case for iPhone® 13 Pro 39.99 0636-0294 Case for iPhone® 12/13 Pro Max 39.99 0636-0295 Case for iPhone® 12/Pro 39.99 0636-0296 Case for iPhone® 11 Pro/XS/X 39.99 0636-0297 Case for iPhone® 11/XR 39.99 0636-0298 Case for iPhone® 11 Pro Max/XS Max 39.99 0636-0299 Case for iPhone® SE/6S/7/8 39.99 0636-0300 Case for Samsung Galaxy S22 39.99 0636-0301 Case for Samsung Galaxy S22+ 39.99 0636-0302 Case for Samsung Galaxy S22 Ultra 39.99 0636-0303 Case for Samsung Galaxy S21 39.99 0636-0304 Case for Samsung Galaxy S21+ 39.99 0636-0305 Case for Samsung Galaxy S21 Ultra 39.99 0636-0306 Case for Samsung Galaxy S21 FE 39.99 0636-0307 Case for Samsung Galaxy S20+ 39.99 0636-0308 Case for Samsung Galaxy S20 Ultra 39.99 0636-0309 Case for Samsung Galaxy S20 39.99 0636-0310 Case for Samsung Galaxy S20 FE 39.99 SPC+ PHONE CASES •Securely mounts to any SP Connect™ holder in just one second •Thanks to a 40% thinner design, the SPC+ model is fully MagSafe®-compatible •Ready for inductive charging and magnetic attachment 0636-0288 0636-0291 0636-0295 0636-0299 0636-0302 0636-0306 0636-0310 0636-0312 0636-0315 PART # DESCRIPTION SUG. RETAIL 0636-0311 Case for Google Pixel 6 $39.99 0636-0312 Case for Google Pixel 6 Pro 39.99 0636-0314 Universal phone case, medium 29.99 0636-0315 Universal phone case, large 29.99 0636-0333 Case for iPhone 14 29.99
BLUE part numbers are new for 2023 PARTS-UNLIMITED.COM 2022-2023 | OLDBOOK UPDATE AUDIO, COMMUNICATION & MOUNTS SECTION 2 OLDBOOK 8 PART # DESCRIPTION SUG. RETAIL 0636-0316 Universal Max, fits all smartphone models up to approx. 61/2” x 31/8” $34.99 0636-0317 Universal, fits smartphone models with a width between approx. 21/4”-31/4” 29.99 SPC+ UNIVERSAL PHONE CLAMP •Easy and secure smartphone mounting on all SPC+ mounting heads •Adjustable universal mount for almost all cell phone models •Durable and 100% waterproof PART # DESCRIPTION SUG. RETAIL 0636-0323 Charging, black $99.99 PART # DESCRIPTION SUG. RETAIL 0636-0321 Black $29.99 0636-0322 Chrome 34.99 SPC+ ANTI-VIBRATION MODULES •Reduces up to 60% of persistent engine vibrations thanks to the specially developed elastomer inlay •Simply replace the compatible mounting head with the SPC+ Anti-Vibration Module and mount your smartphone directly to the vibration dampening module with a 90° clockwise rotation •Offers additional protection for sensitive smartphone parts •CNC-machined from aircraft grade aluminum • Diameter measures approx. 2” PART # DESCRIPTION SUG. RETAIL 0636-0327 SPC+ suction mount $89.99 SPC+ SUCTION MOUNT •Vibration-free suction cup mount quickly and securely attaches your SPC Phone Case to your windshield •Super-stable 360° adjustment 0636-0321 0636-0323 0636-0322 0636-0316 0636-0317 CHARGING SPC+ ANTI-VIBRATION MODULE •Conveniently charges your phone by induction while driving •Mounts on all SPC+ bracket heads •100% weatherproof; includes waterproof USB cable • Diameter measures approx. 21/4” PART # DESCRIPTION SUG. RETAIL 0636-0319 SPC+ universal clamp kit $39.99 SPC+ UNIVERSAL CLAMP KIT •Easy and secure smartphone mounting on all SPC+ mounting heads •Fits almost all smartphone models •Suitable for smartphones with a maximum thickness of 12mm and a width between 21/4” and 31/4” • Will work with 0.875”, 1.0”, 1.125” and 1.25” handlebars •Simple and bombproof locking system •Sold each PART # DESCRIPTION SUG. RETAIL 0636-0320 SPC+ universal adhesive kit $34.99 SPC+ UNIVERSAL ADHESIVE KIT •Attach your smartphone quickly and securely to almost any smooth, flat and non-porous surface •Use in combination with the SPC+ Phone Case •Flexible adhesive mounts for many applications •Can be used as a spare part if required •Easy to stick on surfaces • Includes five practical adhesive mounts, which stick to the surface thanks to the strong 3M VHBTM adhesive PART # DESCRIPTION SUG. RETAIL 0636-0318 Universal charging phone clamp $79.99 UNIVERSAL CHARGING PHONE CLAMP • Waterproof, adjustable universal mount for most smartphone models • Fast, inductive charging with 15 watts of power •Durable and 100% waterproof •Includes waterproof USB cable
BLUE part numbers are new for 2023 AUDIO, COMMUNICATION & MOUNTS DRAGSPECIALTIES.COM OLDBOOK UPDATE | 2022-2023 SECTION 2 OLDBOOK 9 PART # DESCRIPTION SUG. RETAIL 0636-0329 Adhesive Pro mount $4.99 0636-0330 Brake/mirror mount 4.99 0636-0331 Moto Pro mount 14.99 REPLACEMENT SPC+ MOUNTING HEADS •Make your trusted SP Connect™ mount compatible with the new generation of SPC+ phone cases •Light and flat design •Easy to attach; strong hold PART # DESCRIPTION SUG. RETAIL 0636-0313 SPC+ phone mount $24.99 SPC+ PHONE MOUNT •Super-stable 360° adjustment in 6° steps •Mobile phone can be fixed in portrait or landscape format with SPC and SPC+ phone cases •CNC-machined from aircraft grade aluminum •Interchangeable heads for SPC+ and SPC compatibility •If you are using a smartphone with a mechanical image stabilizer, add an additional vibration-dampening module (not included) to best prevent possible damage to your phone’s camera caused by vibrations from motorcycle engines PART # DESCRIPTION SUG. RETAIL 0636-0325 Black $29.99 0636-0326 Black, charging 59.99 SPC+ VENT PHONE MOUNT •Provides quick and secure magnetic mounting of your SPC+ Phone Case on the car air vent • With the SPC+ vent phone mount, your navigation is always in view and you can use the hands-free function of your smartphone while driving •Flexible and compact design PART # DESCRIPTION SUG. RETAIL 0636-0324 SPC+ ring mount $9.99 SPC+ RING MOUNT •This practical cell phone finger holder can be attached to your SPC+ phone case in just a second, giving you a more secure grip on your device •Lightweight and flat design •Also suitable as a stand or for hanging up your smartphone PART # DESCRIPTION SUG. RETAIL 0636-0328 SPC+ universal mount $29.99 SPC+ UNIVERSAL MOUNT •Universal phone mount with hook-and-loop fastener (2 hook-and-loop lengths) • For bicycles, motorbikes, golf carts, baby carriages and more •Mounting and alignment without tools 0636-0331 0636-0330 0636-0329 0636-0325 0636-0326
BLUE part numbers are new for 2023 PARTS-UNLIMITED.COM 2022-2023 | OLDBOOK UPDATE SADDLEBAGS & LUGGAGE, SEATS & SISSY BARS SECTION 3 OLDBOOK 10 PART # DESCRIPTION SUG. RETAIL FOR 97-98 FLHT/FLHR/FLTR 1510-1114 Gloss black $195.95 PART # DESCRIPTION SUG. RETAIL FOR 97-98 FLHT/FLHR/FLTR (CONT) 1510-1115 Matte black $195.95 TOURING SOLO RACKS • Carrying surface: 10.5”W x 13” L • Mounting distance: 10” (measured from center of bolt cutouts to center of back mounting hole) •Made of 12-gauge steel with 3/8” steel wire inside and 1/2” steel tubing outside • Includes bolts, washers and foam pads for rack installation •Made in the U.S.A. 1510-1114 PART # DESCRIPTION SUG. RETAIL FOR ALL TOURING AND TRIKE MODELS EQUIPPED WITH SAE 1/4”-20 THREAD SEAT MOUNT HARDWARE 0820-0202 Mirror polished w/ red, white and blue American flag $47.95 0820-0203 Black w/ red, white and blue American flag 47.95 0820-0204 Mirror polished w/ contrast cut black and white American flag 47.95 0820-0205 Black w/ contrast cut black and white American flag 47.95 0820-0206 Mirror polished w/ blue line American flag 47.95 PART # DESCRIPTION SUG. RETAIL FOR ALL TOURING AND TRIKE MODELS EQUIPPED WITH SAE 1/4”-20 THREAD SEAT MOUNT HARDWARE (CONT) 0820-0207 Black w/ blue line American flag $47.95 0820-0208 Mirror polished w/ green line American flag 47.95 0820-0209 Black w/ green line American flag 47.95 0820-0210 Mirror polished w/ red line American flag 47.95 0820-0211 Black w/ red line American flag 47.95 SEAT MOUNTING KNOBS •Knurled knob is easy to install or remove without tools •Features a raised motif to complete that custom look •Made from 316L stainless steel •SAE 1/4”-20 thread •Does not fit seats equipped with spring-loaded rear seat bracket 0820-0202 0820-0203 0820-0204 0820-0205 0820-0206 0820-0207 0820-0209 0820-0210 0820-0208 0820-0211
BLUE part numbers are new for 2023 SEATS & SISSY BARS DRAGSPECIALTIES.COM OLDBOOK UPDATE | 2022-2023 SECTION 4 OLDBOOK 11 FOR DRESSER/TOURING PART # DESCRIPTION SUG. RETAIL FOR 97-98 FLT/FLHT/FLTR/FLHTC/FLHTCU MODELS 0801-1454 Basket weave seat $583.00 0801-1455 Double diamond seat 606.00 PART # DESCRIPTION SUG. RETAIL FOR 97-98 FLT/FLHT/FLTR/FLHTC/FLHTCU MODELS (CONT) 0801-1456 Pleated seat $606.00 TAILWHIP SEATS •Take the Kickflip one step further •If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for •Molded Marathon Foam •BikerTec custom cover •Highly detailed powdercoated steel carpeted base •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 97-98 FLT/FLHT/FLTR/FLHTC/FLHTCU MODELS 0801-1457 Basket weave seat $560.00 0801-1458 Double diamond seat 583.00 PART # DESCRIPTION SUG. RETAIL FOR 97-98 FLT/FLHT/FLTR/FLHTC/FLHTCU MODELS (CONT) 0801-1459 Diamond seat $583.00 0801-1460 Pleated seat 583.00 KICKFLIP SEATS •The world is your playground….shred it! •The seat that every freestyler would be stoked to own • 6” of back support, 12”W seating area • Durable black Biker Tec cover •Molded Marathon Foam •Seats baseplate is 16-gauge powdercoated steel •Carpeted seat bottom •Made in the U.S.A. 0801-1455 0801-1456 0801-1454 0801-1457 0801-1459 0801-1460
BLUE part numbers are new for 2023 PARTS-UNLIMITED.COM 2022-2023 | OLDBOOK UPDATE EXHAUST SECTION 5 OLDBOOK DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. SEE PAGES 4-5 FOR IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. 12 FOR DYNA GLIDE 2-INTO-1 PART # DESCRIPTION SUG. RETAIL 1800-2622 For 91-98 Dyna w/ mid controls $1,299.95 MID-LENGTH SUPER BIKE 2-INTO-1 EXHAUST SYSTEM • Hand TIG-welded stainless steel construction •13/4 “ headpipes step up to 17/8” into the collector to increase flow and improve performance • 4” diameter straight can 11” muffler body includes matching aluminum end cap •Removable spiral-core perforated baffle features an all-new aggressive sound •18mm and 12mm O2 ports with adapters and plugs •Full coverage stainless heat shields for the front and rear header pipes included •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1800-2624 For 91-98 Dyna w/ mid controls $1,299.95 RIPPER SUPER BIKE 2-INTO-1 EXHAUST SYSTEM •Stepped headers – 13/4” to 17/8” designed for maximum performance and more ground clearance •Utilizes an advanced inner collector for maximum performance • Upswept Super Bike 4” stainless muffler body with aluminum end cap and a new removable conical performance baffle delivers an all new aggressive exhaust sound •Stainless steel construction • Hand TIG welded •Includes 18mm O2 bungs for tuning, 12mm adapters and plugs •Full coverage stainless heat shields for the front and rear header pipes included
BLUE part numbers are new for 2023 FUEL/AIR SYSTEMS DRAGSPECIALTIES.COM OLDBOOK UPDATE | 2022-2023 SECTION 6 OLDBOOK DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. SEE PAGES 4-5 FOR IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. 13 PART # DESCRIPTION SUG. RETAIL 1003-2029 For all 86-06 CV and butterfly-style Keihin carbs $21.95 DIAPHRAGM REBUILD KIT •Rebuild kit for the diaphragm • Includes diaphragm, spring and O-ring PART # DESCRIPTION SUG. RETAIL 1050-0466 For all 84-99 Evolution Big Twin motors $74.95 INTAKE MANIFOLD •Intake manifold for HSR42/45/48 carbs •Rubber flange adapters sold separately PART # DESCRIPTION SUG. RETAIL FOR 93-99 EVOLUTION BIG TWIN MODELS W/ CV CARB 1010-2866 Stage I Big Sucker replacement hardware kit $39.95 1010-2872 Stage II Big Sucker replacement hardware kit 39.95 BIG SUCKER AIR CLEANER REPLACEMENT HARDWARE KITS •Replacement hardware kits for the Original Big Sucker air cleaner series • Each hardware kit includes hardware, gaskets and O-rings for Stage I or Stage II intakes PART # DESCRIPTION SUG. RETAIL FOR 84-99 EVOLUTION BIG TWIN 1001-0085 W/ Super E carburetor and Stealth air cleaner kit w/ chrome teardrop air cleaner cover $999.95 1001-0086 W/ Super E carburetor and Stealth air cleaner kit w/ gloss black teardrop air cleaner cover 999.95 1001-0087 W/ Super G carburetor and Slasher Stealth air cleaner kit w/ chrome slasher teardrop air cleaner cover 999.95 1001-0088 W/ Super G carburetor and Slasher Stealth air cleaner kit w/ gloss black slasher teardrop air cleaner cover 999.95 SUPER E OR G CARBURETOR/STEALTH AIR CLEANER KITS •Combines a Super E or G carburetor with the S&S Stealth air cleaner •Increases fuel and airflow for added performance •Variable position enrichment starting system •O-ring sealed idle mixture screw • Washable, reusable air filter element •Teardrop style air cleaner cover •Adjustable accelerator pump for quick throttle response and easy starting •Uses the factory dual-cable throttle system for smooth, reliable operation •Easy to install and tune •Made in the U.S.A. 1001-0085 1010-2866 1001-0088
BLUE part numbers are new for 2023 PARTS-UNLIMITED.COM 2022-2023 | OLDBOOK UPDATE ENGINE SECTION 7 OLDBOOK DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. SEE PAGES 4-5 FOR IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. 14 PART # DESCRIPTION SUG. RETAIL FOR 84-99 EVOLUTION BIG TWIN OR 70-99 CUSTOM CHASSIS W/ ALTERNATOR-STYLE PRIMARY 0901-0257 Black Edition $6,999.95 0901-0258 Chrome/wrinkle black 6,999.95 PART # DESCRIPTION SUG. RETAIL FOR 84-99 EVOLUTION BIG TWIN OR 70-99 CUSTOM CHASSIS W/ ALTERNATOR-STYLE PRIMARY (CONT) 0901-0259 Chrome/natural $6,999.95 V124 LONG BLOCK ENGINES •124 cubic inch displacement compatible with EFI • Does not include carburetor, air cleaner or ignition, use stock or aftermarket EFI, carburetor or air cleaner •41/8” bore, 45/8” stroke •640 cam •Three-piece flywheel assembly • 1.671” diameter crankpin • .927” wristpins •10.8:1 compression forged pistons • High-volume, high-pressure (HVHP) oil pump •Electric compression releases •Chrome/wrinkle black engine includes chrome billet timing covers •Chrome/natural finish engine includes chrome-plated engine and timing covers •Black Edition engine includes gloss black engine covers in place of the standard chrome covers •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0901-0256 For 84-99 Evolution Big Twin or 70-99 custom chassis w/ alternator-style primary $6,499.95 V111 LONG BLOCK NATURAL FINISH ENGINE •Approximately a 30% increase in HP and torque over stock •Compatible with EFI •Short stroke for less vibration and longer engine life •Shorter than stock engine height for easy installation •Does not include carb or ignition; use stock or aftermarket carburetor and air cleaner • High-volume, high-pressure (HVHP) oil pump • Durable S&S 3-pc. flywheels •Performance 585 cam and valve springs •41/8” x 41/8” bore and stroke •9.8:1 compression ratio •Made in the U.S.A. •See page 374 of the 2022-23 Drag Specialties OldBook for additional V111 Long Block engines 0901-0257 0901-0258 0901-0259
BLUE part numbers are new for 2023 ENGINE DRAGSPECIALTIES.COM OLDBOOK UPDATE | 2022-2023 SECTION 7 OLDBOOK DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. SEE PAGES 4-5 FOR IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. 15 PART # DESCRIPTION SUG. RETAIL 0927-0026 For 36-47 Big Twin models $1,309.95 ROCKER ARM AND SHAFT KIT •Compatible with S&S or stock tins •Rocker arms are not compatible with stock rocker shafts •High quality CNC-machined •1:1 stock knuckle rocker arm ratio •Improved oil control • Kit includes four rocker arms (FE, FI, RI, and RE) four rocker shafts, washers and spacers PART # DESCRIPTION SUG. RETAIL FOR 84-99 EVOLUTION BIG TWIN 0928-0118 .020” shorter than stock length (designed for Feuling® 518 EVO cam grind PART #0925-1037 or other cams requiring slightly shorter pushrods) $169.95 0928-0119 Stock length (works with Feuling® 543 EVO cam grind and most other cams that require stock length pushrods) 169.95 HP+® ONE-PIECE PUSHRODS •Feuling highly recommends using one-piece pushrods instead of adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues • Fixed length, 4130 chromoly one-piece pushrods with swedged formed ends • Heavy-duty 7/16” diameter tube with a wall thickness of .165” •Heat-treated with a black oxide finish •Made in the U.S.A. NOTE: Requires removal of rocker covers and rocker arms for installation. 0928-0118
BLUE part numbers are new for 2023 PARTS-UNLIMITED.COM 2022-2023 | OLDBOOK UPDATE TRANSMISSION & DRIVELINE SECTION 8 OLDBOOK 16 PART # DESCRIPTION SUG. RETAIL FOR 84-98 FLT/FLHT/FLHR/FLTR MODELS 1601-0571 Chrome $79.95 1601-0572 Black 79.95 1601-0573 Gold 84.95 INNER SHIFT LINKAGE ARMS •CNC-machined billet aluminum construction •Sold each PART # DESCRIPTION SUG. RETAIL FOR 84-98 FLT/F LHT/FLHR/FLTR, 86-99 FXST/FLST AND 93-98 FXDWG MODELS 1602-1495 Chrome $129.95 1602-1496 Black 129.95 1602-1497 Gold 139.95 T-REX SHORTY SHIFT ARMS •CNC-machined billet aluminum construction • Measure 5”, 1.25” shorter than stock •Allows driver to keep feet in a more aggressive stationary position while braking •Include spacer when heel shifter is removed •Coordinating shifter pegs are available separately PART # DESCRIPTION SUG. RETAIL FOR 84-98 FLT/FLHT/FLHR/FLTR, 86-99 FLST/FXST AND 93-98 FXDWG 1603-0386 Raw $79.95 1603-0387 Black 89.95 BILLET COUNTY SHIFTER •Billet aluminum construction •Stock length •Does not include shift peg •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 84-98 FLHT/FLHR/FLHX/FLTR AND 86-99 FLST 1602-1472 Mirror polished w/ red, white and blue American flag $51.95 1602-1473 Black w/ red, white and blue American flag 51.95 1602-1474 Mirror polished w/ black and white American flag 51.95 1602-1475 Black w/ black and white American flag 51.95 1602-1476 Mirror polished w/ blue line American flag 51.95 PART # DESCRIPTION SUG. RETAIL FOR 84-98 FLHT/FLHR/FLHX/FLTR AND 86-99 FLST (CONT) 1602-1477 Black w/ blue line American flag $51.95 1602-1478 Mirror polished w/ green line American flag 51.95 1602-1479 Black w/ green line American flag 51.95 1602-1480 Mirror polished w/ red line American flag 51.95 1602-1481 Black w/ red line American flag 51.95 HEEL-TOE SHIFTER COVERS •Conceal the splined end of the shifter shaft when removing the heel shift lever •Figurati Designs docking hardware features 316F stainless steel with Neodymium magnets for a solid hold •Includes set screws with anti-vibration nylon glue and hex wrench 1602-1478 1602-1479 1602-1480 1602-1481 1602-1472 1602-1473 1602-1474 1602-1475 1602-1476 1602-1477 1601-0572 1601-0571 1601-0573 1603-0386 1602-1496 1602-1495 1602-1497 1603-0387
BLUE part numbers are new for 2023 HANDLEBARS, CONTROLS & MIRRORS DRAGSPECIALTIES.COM OLDBOOK UPDATE | 2022-2023 SECTION 12 OLDBOOK 17 NOTE HANDLEBARS LISTED WILL NOT ACCEPT H-D OEM HEATED GRIPS (EXCEPT AS NOTED). CHROME PART # SUG. RETAIL BLACK PART # SUG. RETAIL END RISE WIDTH CENTER WIDTH PULLBACK 0601-5965 $454.95 0601-5966 $454.95 12” 301/2” 101/2” 51/2” 0601-5967 454.95 0601-5968 454.95 14” 301/2” 101/2” 51/2” 0601-5969 454.95 0601-5970 454.95 16” 301/2” 101/2” 51/2” CHROME PART # SUG. RETAIL BLACK PART # SUG. RETAIL END RISE WIDTH CENTER WIDTH PULLBACK 0601-5971 $443.95 0601-5972 $443.95 12” 301/2” 101/2” 41/2” 0601-5973 443.95 0601-5974 443.95 14” 301/2” 101/2” 41/2” 0601-5975 443.95 0601-5976 443.95 16” 301/2” 101/2” 41/2” PART # HEIGHT PULLBACK SUG. RETAIL FOR HANDLEBARS W/ 1” DIA. CLAMPING AREA 0602-1407 6” 0” $489.95 0602-1408 8” 0” 499.95 0602-1409 10” 0’ 509.95 0602-1410 6” 2” 509.95 0602-1411 8” 2” 519.95 0602-1412 10” 2” 529.95 FOR HANDLEBARS W/ 11/4” DIA. CLAMPING AREA 0602-1413 6” 0” 489.95 0602-1414 8” 0” 499.95 0602-1415 10” 0” 509.95 0602-1416 6” 2” 509.95 0602-1417 8” 2” 519.95 0602-1418 10” 2” 529.95 PERFORMANCE RISER KITS •Kit includes two rigid-mount risers with top clamps and all necessary mounting hardware •Billet aluminum construction with a chrome-plated finish •Sold in pairs •Made in the U.S.A. 0601-5971 0601-5976 0601-5965 0601-5970 11/2” HAMMERHEAD HANDLEBARS •Aggressive new look •Pointed tip for a look that stands out in the crowd •51/2” of pullback for an aggressive feel •11/4” diameter clamping area with 31/2” on-center knurling (requires the use of 11/4” risers and clamp) •Made in the U.S.A. Note: Accept OEM heated grips. 11/2”THRESHER HANDLEBARS • Traditional T-Bar look and feel •Aggressive 90° mitered top •11/4” diameter clamping area with 31/2” on-center knurling (requires the use of 11/4” risers and clamp) •41/2” of pullback for an aggressive feel •Made in the U.S.A. Note: Accept OEM heated grips. 0602-1407 0602-1418
BLUE part numbers are new for 2023 PARTS-UNLIMITED.COM 2022-2023 | OLDBOOK UPDATE BRAKES,TANKS & OIL FILTERS, FRAMES & SUSPENSION SECTION 14 OLDBOOK 18 PART # DESCRIPTION SUG. RETAIL FOR 84-98 FLT/FLHT/FLHR/FLTR, L87-99 FLST/FLSTF/FLSTN 1610-0661 Raw $109.95 PART # DESCRIPTION SUG. RETAIL FOR 84-98 FLT/FLHT/FLHR/FLTR, L87-99 FLST/FLSTF/FLSTN (CONT) 1610-0662 Black $109.95 BILLET COUNTY BRAKE PEDALS •Machined billet aluminum for an aggressive yet subdued look • 4.5” x 2.75” •Sold each •Made in the U.S.A. 22MM HEX POWER-FLO™ FUEL VALVE •Substantially higher fuel flow compared to OEM or aftermarket fuel valve •Necessary for adequate fuel delivery even on stock motorcycles and a must for high performance •Single outlet with a chrome finish •Available with 22mm external threads; has a 5/16” hose barb; 180° outlet facing inward •Made in the U.S.A. •See page 997 of the 2022-2023 Drag Specialties OldBook for the complete line of Pingel Power-Flo™ Fuel Valves PART # DESCRIPTION SUG. RETAIL 0706-0433 Universal FI hose kit $25.95 UNIVERSAL FUEL INJECTION HOSE KIT •Universal preformed FI line includes 2” of fuel line at 60° and 45° bends, plus additional 4” at 90° bend allows you to cut and make almost any shape • Includes 5/16” x 5/16” straight barb fitting •Fits most OEM 5/16” or 8mm ID applications •EPA/CARB Certified • SAE J30 standard is safe for gasoline, diesel and oil •Temp range -40°F-302°F (-40°C-150°C) •Designed to fit in your travel tool kit •Clamps not included PART # DESCRIPTION SUG. RETAIL 0502-0596 For 80-98 FLT/FLHT/FLHR/FLTR models w/ stock .629” pivot shaft $760.95 0502-0599 For 82-94, 00 FXR models w/ aftermarket conversion .750” pivot shaft installed 760.95 0502-0598 For 82-94, 00 FXR models w/ stock .629” pivot shaft 760.95 MAD DOG MOUNTING SYSTEMS •Pivot Shaft will stabilize swingarm movement, thus improving control at all speeds •A pair of cylindrical style metal bushings with an inner metal layer encased in vulcanized rubber provide a superior, long-lasting vibration isolator •Black pivot blocks and pivot shaft included •Made in the U.S.A. 1610-0661 1610-0662 0502-0596 PART # DESCRIPTION SUG. RETAIL 0706-0432 5/16” x 5/16” barb fitting $2.99 FUEL LINE BARB FITTING •Forged brass body •5/16” x 5/16” barb fitting NOTE: All descriptions are made from a seated position on the motorcycle with a reference from outlet position to the On, Reserve, and Off positions of the fuel valve lever. NOTE: Not legal for street use in CA for all make/model year applications. PART # SUG. RETAIL 0705-0552 $137.95
BLUE part numbers are new for 2023 FENDERS & LICENSE PLATE FRAMES,FOOTRESTS & FLOORBOARDS DRAGSPECIALTIES.COM OLDBOOK UPDATE | 2022-2023 SECTION 18/19 OLDBOOK 19 PART # DESCRIPTION SUG. RETAIL 1401-0963 For 94-98 FLT/FLH/FLHR/FLTR models w/ 18” or 19” front tires $339.99 RETRO FRONT FENDER •Easy way to give a bike a retro look •14-gauge stamped steel construction • 6” wide at the bolting surface •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 80-98 FLT/FLHT/FLHR/FLTR MODELS AND 86-99 FLST/F/N 1621-1128 Raw $449.95 1621-1129 Black 449.95 1621-1134 Chrome 499.95 BILLET COUNTY FLOORBOARDS •Machined billet aluminum floorboards and mounts •Designed for improved grip with a moto inspired look and feel •Measure 111/2” x 4” •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL MALE MOUNT 1620-2433 Raw $199.95 1620-2434 Black 199.95 BILLET COUNTY FOOTPEGS •Billet aluminum performance footpegs featuring stainless-steel mounts •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1603-0388 Chrome $49.95 1603-0389 Black 49.95 1603-0390 Gold 54.95 SHIFTER PEGS •CNC billet 6061 aluminum • Measure 1.75” long x 1” wide •Include replacement mounting bolt, 5/16-24 thread, 1” length • Made to fit directly with Pro-One’s T-Rex shorty shifters PART # DESCRIPTION SUG. RETAIL 1610-0676 Chrome $49.95 1610-0677 Black 49.95 1610-0678 Gold 54.95 BRAKE PEGS •CNC-machined from billet aluminum • Measure 3” long x 1.5” wide •Include replacement mounting bolt, 5/16-24 thread • Made to fit directly with Pro-One’s T-Rex shorty brake arms 1610-0678 1610-0677 1610-0676 1603-0389 1603-0390 1603-0388 1620-2434 1620-2433 1621-1129 1621-1128
20 Update
BLUE part numbers are new for 2023 WINDSHIELDS & FAIRINGS DRAGSPECIALTIES.COM FATBOOK UPDATE | 2023 SECTION 1 FATBOOK 21 PART # DESCRIPTION SUG. RETAIL FOR 22-23 FXLRST 2310-0761 6” dark smoke $249.95 2310-0770 10” dark smoke 249.95 PART # DESCRIPTION SUG. RETAIL FOR 21-23 RA1250/RA1250S 2310-0774 15.5” tint $249.95 FLARE™ WINDSHIELDS • The patented design features “hips” at the sides that re-route the wind away from riders while adding downforce to the front-end of the motorcycle to improve stability vs. riding with the stock windshield •The flip at the top of the Flare™ redirects air back as clean, less turbulent air for rider and passenger •Wind tunnel designed and tested •Lexan® polycarbonate with FMR hard coating is used to create these custom-molded designs with unmatched durability •All are predrilled for easy mounting using stock windshield hardware •Pan American Flare includes new mounting hardware that is longer than stock •Made in the U.S.A. •See page NP3 and pages 8-10 of the 2023 Drag Specialties FatBook for the complete line of Flare™ windshields The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. Wind tunnel designed and tested 2310-0761 2310-0770 2310-0774
BLUE part numbers are new for 2023 PARTS-UNLIMITED.COM 2023 | FATBOOK UPDATE WINDSHIELDS & FAIRINGS SECTION 1 FATBOOK 22 PART # DESCRIPTION SUG. RETAIL FOR 22-23 FXLRST 2310-0762 Clear (+2”) $129.95 2310-0763 Clear (+4”) 139.95 2310-0764 Clear (+6”) 139.95 PART # DESCRIPTION SUG. RETAIL FOR 22-23 FXLRST (CONT) 2310-0765 Med. smoke (+2”) $142.95 2310-0766 Med. smoke (+4”) 154.95 2310-0767 Med. smoke (+6”) 154.95 PART # DESCRIPTION SUG. RETAIL FOR 22-23 FXLRST (CONT) 2310-0768 Dark smoke (+2”) $142.95 2310-0769 Dark smoke (+4”) 154.95 S230/231 WINDSHIELDS •Direct replacement for the Low Rider ST fairing windshields • Made from .118” aircraft-quality acrylic • Available in clear, medium smoke or dark smoke tints in heights listed •Install using existing factory hardware •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 14-22 FLHT/FLHTK/FLHTCU/FLHX AND FLHTCUTG MODELS 2040-2999 Chrome $249.99 2040-3000 Black 249.99 PART # DESCRIPTION SUG. RETAIL FOR 15-22 FLTRX/FLTRK/FLTRU MODELS 2040-2997 Chrome $229.99 2040-2998 Black 229.99 TRACER WINDSHIELD TRIM LED LIGHTS •Durable injection-molded ABS construction with smoked polycarbonate lenses •Features stylish diffused (solid) lighting effect with high-intensity output •Dual function (run/turn) lighting is white while running and amber on turn signal 2040-2999 2040-2998 2310-0766 2310-0769 2310-0762
BLUE part numbers are new for 2023 WINDSHIELDS & FAIRINGS DRAGSPECIALTIES.COM FATBOOK UPDATE | 2023 SECTION 1 FATBOOK 23 PART # DESCRIPTION SUG. RETAIL 2040-2990 For 14-22 FLHTCU/FLHTCUL/FLHTK/FLHTKL/FLHTKSE, 16-22 FLTRU/FLTRK/FLTRUSE/FLTRKSE, 15-19 FLHXSE, 14-22 FLHTCUTG/FLHTCUTGSE $149.95 PROGLOW™ COLOR CHANGING LED LOWER FAIRING INSERTS •Direct replacement for the OEM lower fairing radiator grilles or filler plates •Has 48 ProGLOW™ color changing LEDs per side •Unit simply snaps in place with plug-and-play wiring for easy installation •Open honeycomb grille cover allows air to flow through •Required ProGLOW™ Bluetooth® controller (Part# 2050-0440, sold separately) connects to the ProGLOW™ app through your personal iOS or Android device to customize and control your color changing lights •Unlimited color combinations can be selected using the color wheel or color-match technology with camera access while easy-to-use sliders let you fine-tune the brightness and speed of each movement •Can also be synced with music for a complete audiovisual experience • Optional Lower Fairing Blocker Plates PART #0521-1898 (sold separately, see page 65 of the 2023 Drag Specialties FatBook) can be installed behind the grille for a solid panel appearance PART # DESCRIPTION SUG. RETAIL 2020-2135 For 20-22 FLTRK, 14-22 FLHTK/FLHTKSE, 14-19 FLHTCU, 15-16 FLHTCUL/FLTRUSE, 15-19 FLHTKL/FLHXSE, 16-19 FLTRU models $209.95 LED LIGHT INSERTS FOR LOWER FAIRING •Function as both running and auxiliary turn signal lights •The inserts produce a bright amber running light with full-contrast amber turn signal that’s virtually invisible when off •Each side features 53 amber LEDs •Units snap in place with plug-and-play installation PART # DESCRIPTION SUG. RETAIL 2330-0268 For 99-13 FLHT/FLHX/FLHTCUTG/FLHXXX; repl. OEM #s 58478-96B, #58479-96B $103.95 HEAVY-DUTY OUTER FAIRING SUPPORT BRACKETS •Made with thick 13 gauge steel for increased strength •Black powdercoated for superior rust resistance •Ideal for use on bikes with upgraded speakers and/or amps •Sold as a set •See page 67 of the 2023 Drag Specialties FatBook for the entire line of Drag Specialties fairing support brackets
BLUE part numbers are new for 2023 PARTS-UNLIMITED.COM 2023 | FATBOOK UPDATE AUDIO, COMMUNICATION & MOUNTS SECTION 2 FATBOOK 24 800-WATT AMP/FRONT SPEAKER AND 6” X 9” LID KITS • Complete kits with fairing speakers, saddlebag lids with 6” x 9” speakers and 2 amps for 800 watts of total power • Features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp •Dual WBA 400.2r amplifiers easily install inside inner fairing •Pre-tuned to factory radio; makes installation very simple •Safe for bike’s charging system •All required hardware and wire is included •Supplied plug-and-play wire harness allows radio’s fader to work •A radio software reflash required PART # DESCRIPTION SUG. RETAIL 4405-0891 For 19-22 FLHT Standard $869.95 4405-0896 PART # DESCRIPTION SUG. RETAIL 4405-0896 For 14-22 FLHT/FLHTCU/FLHTK/FLHX/FLHXS/FLHXST models $2,099.95 PART # DESCRIPTION SUG. RETAIL 4405-0897 For 15-22 FLTRX/FLTRU/FLTRK models $2,149.95 150 WATT AMP/FRONT SPEAKER KIT •Complete Easy to Install Kit with 150 watt amp, Wild Boar Speakers and Bluetooth® controller •Excellent performing system without the need to purchase a stereo! •2nd pair of Wild Boar Speakers can be added to lids, lowers or tour pak •Bluetooth controller mounts to panel on left of radio opening for system control while riding •All required plug and play wiring and hardware to complete the installation is included
BLUE part numbers are new for 2023 AUDIO, COMMUNICATION & MOUNTS DRAGSPECIALTIES.COM FATBOOK UPDATE | 2023 SECTION 2 FATBOOK 25 4405-0893 PART # DESCRIPTION SUG. RETAIL 4405-0892 For 14-23 FLHT/FLHX/FLTRU/FLTRK models w/ factory saddlebag lids $299.95 RETRO CUT-IN SPEAKER LID KIT WITHOUT SPEAKERS • Includes single-use templates for cutting lids, custom tooled speaker adaptors, grilles with chrome and blacked-out badges, custom tooled silicone speaker gaskets, all required wiring and plug-and-play harnesses PART # DESCRIPTION SUG. RETAIL 4405-0893 For 14-23 FLHT/FLHX/FLTRU/FLTRK models w/ factory saddlebag lids $549.95 RETRO CUT-IN SPEAKER LID KIT WITH SPEAKERS •Factory Lid Cut-in kit with XL Series 6” x 9” 2-ohm, 200 watt lid speakers • Includes single use templates for cutting lids, custom tooled speaker adaptors, grills with chrome and blacked-out badges, custom tooled silicone speaker gaskets, all required wiring and plug-and-play harnesses •Speakers offer superior bass response and overall better sound; large magnet assembly for higher power handling •Factory latch/lock mechanism bolts into new lids •Features a built-in water drainage system to keep everything dry • Available in matte black, primed and ready for paint •NOTE: Required amplifier is not included for PART# 4405-0893. PART # DESCRIPTION SUG. RETAIL 4405-0894 For 14-23 FLHT/FLHX/FLTRU/FLTRK models w/ factory saddlebag lids $1,499.95 RETRO CUT-IN SPEAKER LID KIT WITH SPEAKERS AND AMPLIFIERS •Factory Lid Cut-in kit with two REV 225-RM amplifiers, one pair of Hogtunes 462F-RM Fairing Speakers and one pair Hogtunes 692-XL 6” x 9” lid speakers • Includes single use templates for cutting lids, custom tooled speaker adaptors, Batwing and Road Glide front grilles with chrome and blacked-out badges, custom tooled silicone speaker gaskets, all required wiring and plug-and-play harnesses
BLUE part numbers are new for 2023 PARTS-UNLIMITED.COM 2023 | FATBOOK UPDATE AUDIO, COMMUNICATION & MOUNTS SECTION 2 FATBOOK 26 PART # DESCRIPTION SUG. RETAIL FRONT SPEAKERS 4405-0881 For 14-22 FLHT/FLHX/FLHTCUTG models $529.95 4405-0882 For 15-22 FLTRX/FLTRU/FLTRK models 529.95 PART # DESCRIPTION SUG. RETAIL REAR/FAIRING LOWER SPEAKERS 4405-0883 For 14-22 FLHT/FLHX/FLTRX/FLTRU/FLTRK/FLHTCUTG models (rear speakers) $529.95 4405-0884 For 14-22 FLHT/FLHX/FLTRX/FLTRU/FLTRK/FLHTCUTG models (fairing lowers speakers) 749.95 ROKKER® XXR 6.71” SPEAKER KITS •Maximum 300W input •One-piece lightweight driver cone •Same size components as stock speakers •Easy installation requiring no modifications •See page 95 of the 2023 Drag Specialties FatBook for the entire line of J&M Rokker XXR 6.71” speaker kits PART # DESCRIPTION SUG. RETAIL 4402-0976 For 19-22 FLHT/FLHX//FLTRX/FLHTCUTG models $11.95 CARPLAY JUMPER HARNESS •Designed to enable the use of Apple CarPlay® and Android on models with GTS (touchscreen) radios •Easy-to-install by simply connecting to the open factory harness within the front fairing •No cutting of wiring is required •OE-style water-resistant connector •Not compatible with CVO models or wireless headset system •GTS radio will need to be on latest H-D firmware; contact local dealer for update if necessary PART # DESCRIPTION SUG. RETAIL FOR 99-23 FLHT/FLHX/FLTR AND 09-23 FLHTCUTG MODELS 4401-0270 Chrome $49.99 4401-0271 Black 49.99 HIGH CALIBER 8” FLEXIBLE ANTENNA •Perfect replacement for stock antenna • Works great with bike covers; fits with or without removable Tour Pak® •Made out of 6061 aluminum with flexible rubber base that prevents bends or breaks •Easy installation; works with AM/FM/WB (no CB) applications 4401-0271 4401-0270 4405-0881 4405-0882 4405-0883 4405-0884
BLUE part numbers are new for 2023 AUDIO, COMMUNICATION & MOUNTS DRAGSPECIALTIES.COM FATBOOK UPDATE | 2023 SECTION 2 FATBOOK 27 PART # DESCRIPTION SUG. RETAIL 4402-0975 ACS-RAM custom communication system $199.00 ACS-RAM CUSTOM COMMUNICATION SYSTEM • Bluetooth® 5.1 communication system designed specifically for the Arai SZ-R VAS Open-Face Helmet •Features a two-way HD intercom (0.3-mile range) •Custom helmet fit • Noise cancellation: Advanced Noise Control™ •Compatible with Sena smartphone apps •Talk time: up to 12 hours •Charging time: 2.5 hours • Speaker measures 1.9” x 0.6” • Boom microphone measures 6.3” in length PART # DESCRIPTION SUG. RETAIL 4402-0974 ACS10 communication system $199.00 ACS10 COMMUNICATION SYSTEM FOR ARAI CONTOUR-X • Bluetooth® 4.1 communication system designed specifically for the Arai motorcycle helmet • Headset consists of HD Speakers, a microphone, three-button control and a battery, which are easily installed into the helmet •Designed for the exact interior recesses of the Contour-X, allowing for the perfect fit •Four-way Bluetooth® intercom (1-mile range) • Noise cancellation: Advanced Noise Control™ •Talk time: up to 10 hours •Charging time: 2.5 hours • Measures 3” x 2.7” x 2.3” PART # DESCRIPTION SUG. RETAIL 4402-0973 Expand Mesh communication headset $199.00 EXPAND MESH COMMUNICATION HEADSET •Compact communication headset equipped with Mesh Intercom™ technology allowing for easy group communication • With just a touch of a button, link multiple Expand Mesh headsets and/or any Sena Mesh Intercom™ device for open communication •Smartphone connectivity •Audio Multitasking™ • Bluetooth® 5.2 •Built-in speakers and mic • Noise cancellation: Advanced Noise Control™ •Talk time: up to 10 hours •Charging time: three hours •Sena Outdoor app-compatible • Designed to wear comfortably with hats, helmets or sunglasses • Measures 6.5” x 4.7” x 5.6” PART # DESCRIPTION SUG. RETAIL 4402-0964 PI universal Bluetooth® intercom $99.00 PI UNIVERSAL BLUETOOTH® INTERCOM •Convert your favorite helmet into a Sena smart helmet •Compact headest features a two-way Bluetooth® 4.1 HD intercom •Attaches to most helmet straps with strap width of up to 0.7” •Pairs with other Bluetooth devices without the need for a smartphone or data service •Effecting working range of up to 0.25 miles •Hand-free profile with Advanced Audio Distribution Profile (A2DP) •Talk time of up to 6 hours per battery charge •Easy two-button operation • Noise cancellation: Advanced Noise Control™ •Supports up to two users •Compatible with Sena smartphone apps
BLUE part numbers are new for 2023 PARTS-UNLIMITED.COM 2023 | FATBOOK UPDATE AUDIO, COMMUNICATION & MOUNTS SECTION 2 FATBOOK 28 PART # DESCRIPTION SUG. RETAIL 4402-0971 Single headset $139.95 PART # DESCRIPTION SUG. RETAIL 4402-0972 Dual pack $269.95 BLUETOOTH HEADSET •Includes J&M Corporation’s proprietary Bluetooth 5.0 software package with improved on-highway volume levels and smoother operation with the latest versions of the iPhone and Android operating systems •Designed for installation into most flip-up modular, full-face or open-face style helmets • This helmet headset kit includes BT05 control head, USB charger/ adapter cable, both boom and chin-bar style microphones, two slim-line high-output mount in helmet speakers, mounting clip, control head base, mounting hardware, hook-and-loop/ adhesive pads and complete installation/operation instructions •Full function operating time: 8 hours •Intercom mode: helmet to helmet •Intercom mode talk distance: 1968 ft. •Time to full charge: 3 hours •Full charge standby: 20 days •Lithium-Ion battery capacity: 800 mAh •Voice command dial: One-touch voice-command from cell phone contacts •Helmet speakers: stereo slim-line high-output •Boom/chin-bar microphones: noise cancelling • Charge port connector type: USB Type-C •Mounting features: clip-on or adhesive backed mounting plate PART # DESCRIPTION SUG. RETAIL 0636-0287 Trim Line Arm Kit $25.99 TRIM LINE ARM KIT FOR CYBERCHARGER® •Slim design that won’t interfere with the buttons on the side of your smartphone •Premium wings and support leg have integrated rubber damping and provide a non-slip grip •Support leg allows for height adjustments to fit any device •Easy installation •Fits all Ciro Cyberchargers® (Cybercharger® phone holder sold separately) •Comes in black finish PART # COLOR SUG. RETAIL FOR ALL 99-23 H-D MODELS (EXCEPT 15-20 XG 500/750) 0636-0334 Chrome $32.99 PART # COLOR SUG. RETAIL FOR ALL 99-23 H-D MODELS (EXCEPT 15-20 XG 500/750) (CONT) 0636-0335 Black $32.99 OFFSET PERCH MOUNT • Allows for your phone or drink holder to be offset 2” from your hand controls (drink or phone holder sold separately) •Easy installation • Can be mounted on left or right side, right side up or upside down •Made of diecast aluminum •See page 133 of the 2023 Drag Specialties FatBook for the complete line of Ciro Accessory Mounts 0636-0334 0636-0335 4402-0971
www.parts-unlimited.comRkJQdWJsaXNoZXIy OTcxOTk3