BOLD MAGENTA part numbers are new for 2023 DRAGSPECIALTIES.COM 2023 | TIRE & SERVICE V-TWIN TOOLS 640 PART # DESCRIPTION SUG. RETAIL 3807-0446 For 11-19 CAN bus with 6-pos DLC connector, 01-14 36-pin Delphi fuel-injected and 04-06 carbureted models w/ 12-pin module $1,535.95 TWIN SCAN COMPLETE KIT • Complete tuning and diagnostic solution • Includes Twin Scan II ABS for 01-14 models with J1850 data bus,Twin Scan 4 for 11-19 CAN data bus with 6-position DLC connector,WEGO IIID for tuning capability with both Twin Scan versions, and the Twin Scan 3 Probe Kit for use with the scopemeter feature of the Twin Scan • Communicates with ECM and BCM to read, then clear diagnostic trouble codes • Activates ABS solenoids for proper brake bleeding and testing • Ideal tuning aid for Screamin’ Eagle Pro Super Tuner (SEST), Dynojet Power Commander (PC) and Twin Tec Twin Tuner • Includes all features of the standard Twin Scan units • Real-time display of engine sensors along with built-in data logging with capability to store data for up to one hour • Included PC software analyzes logged data, then displays front and rear cylinder AFR with the required volumetric efficiency (VE) using the same RPM rows and TPS/MAP columns used in the Super Tuner tables • Includes two analog inputs with 0-20V or ±200V range as well as two-channel oscilloscope capability for waveform display • Analog inputs can also be used for air/flow ratio (AFR) • Requires use of a PC with Windows 7,Windows 8 or Windows 10 for display • Includes two Bosch LSU 4.2 wide-band oxygen sensors, two 18mm x 1.5 weld nuts, two 18mm x 1.5 hex socket plugs, USB cable,Twin Scan 3 probe kit and CD-ROM with software • Made in the U.S.A. NOTE: See page 610 of 2023 Drag Specialties FatBook for replacement weld nuts to mount O2 sensors. PART # DESCRIPTION SUG. RETAIL 3807-0445 Twin Scan 4 for 14-20 Touring, 11-20 Softail, 12-17 Dyna and 14-20 XL models w/ CAN data Bus (all models with a 6-pin diagnostics connector) $551.95 3807-0206 Twin Scan 2 for 01-13 models including V-Rod and 08-13 Touring models w/ 36-pin Delphi fuel-injection system (except 11-13 Softail and 12-13 Dyna models) and 03-06 carbureted models w/ 12-pin module 516.95 1022-0224 Twin Scan WEGO Upgrade Kit for any Twin Scan II, 3 or 4; includes WEGO IIID Interface, two Bosch LSU 4.2 wide-band oxygen sensors, two 18 x 1.5mm weld nuts and two 18 x 1.5mm hex socket plugs 541.95 3807-0189 Twin Scan Probe Kit 224.95 TWIN SCAN DIAGNOSTIC KITS • Communicate with ECM,TSSM and BCM to read, then clear diagnostic trouble codes • Activate ABS solenoids for proper brake bleeding and testing • Real time display of engine sensors along with built in data logging will store data for up to one hour • Data logging automatically triggered when a trouble code is set and shows the data before and after code is set • PART #3807-0445 programs and reads key fobs, programs PIN and disables security • Activate modules, lights, indicators fuel pump drain and electronic throttle sweep; tests different actuators, lights and indicators • Calibrate speedometer, remove new speedometer display of VinErr • Enable or disable settings in the ECM such as ACR (automatic compression release for performing engine compression testing), EITMS, cruise control, and active exhaust, reads and sets engine idle speed rpm • Enable or disable settings in the BCM for ignition switch, new radio installation, bank angle sensor for trike installs, program fog light function,ABS installation, and enable service state • Latest software will include the latest firmware for easy remote updating of the Twin Scan 4 • Include two analog inputs with 0-20V or ± 200V range as well as two-channel oscilloscope capability for waveform display • Analog inputs can also be used for air/flow ratio (AFR) • Easy to navigate software • Require use of a PC with Windows 7,Windows 8 or Windows 10 for display • WEGO IIID dual channel wide-band exhaust gas oxygen sensor interface upgrade kit PART #1022-0224 will log engine data along with the actual air/fuel ratio (AFR); logged AFR data can be analyzed and displayed • Use probe kit PART #3807-0189 to use scopemeter function; includes two insulation-piercing probes and 12V power adapters • Use PART #1022-0008 for replacement Bosch O2 sensor; sold each • Made in the U.S.A. NOTE: Models equipped with 12mm oxygen sensors will require 18mm weld nuts be installed in the exhaust system for use with the Twin Scan 3+ kit 18mm oxygen sensors. 3807-0189 3807-0206 3807-0445 PART # DESCRIPTION SUG. RETAIL 1022-0054 Single channel $533.95 PART # DESCRIPTION SUG. RETAIL 1022-0110 Dual channel $705.95 WEGO III WIDE-BAND AFR (AIR/FUEL/ RATIO) MONITORING TOOLS • Professional air/fuel ratio system with built-in data logging • Versatile tuning aid for carbureted and fuel injection engines; suitable for on-road and dyno tuning • Highly accurate with less than +/- 0.10 AFR error over 10.3-19.5 AFR range using Bosch LSU 4.2 5 wire wide band oxygen sensor(s) • Easy free air calibration procedure corrects for effects created due to sensor aging • 0-5V analog AFR output for interface to dyno instrumentation; easily interfaced to all leading dyno systems • Waterproof with ultra-bright daylight-readable blue display features automatic dimming function • 11-16V DC supply voltage needed for operation; current drain is approximately 1 amp • Built in USB interface • Data logging software needs a PC or laptop with Windows 7/8/10; data can also be exported to an Excel spreadsheet for further analysis • Compact size: 4” L x 2”W x .5” H • Include WEGO III Wide Band Exhaust Gas O2 Sensor Interface, 42” harness, Bosch O2 Sensor(s), 18mm x 1.5 weld nut(s) for sensor mounting and software • Use PART #1022-0008 for replacement Bosch O2 sensor (sold each) • Made in the U.S.A. 1022-0110
RkJQdWJsaXNoZXIy OTcxOTk3