BOLD MAGENTA part numbers are new for 2024 V-TWIN TOOLS DRAGSPECIALTIES.COM TIRE & SERVICE | 2024 639 O2 BUNG INSTALLATION KITS • Kits to add 18mm x 1.5” threaded bungs for O2 sensors and O2 tuning samplers • Remove heat shields, install bung and tune; when completed, use included screw and copper washer to seal bung and then replace heat shield for unaltered finish •No pump or sampling tube required and allows both cylinders to easily be monitored at the same time •No welding •Complete bung installation kit includes one hydraulic insertion tool, one drill bit, two O2 sampler blocks, tubing, 25 Rivnuts, 25 screws and 25 copper washers, all contained in plastic case • Bung installation kit includes one drill bit, two O2 sampler blocks, tubing, 25 Rivnuts, 25 screws and 25 copper washers •Refill kit PART #3807-0398 includes 25 each of bungs, plugs and copper washers, sold separately •Made in the U.S.A. TWIN SCAN COMPLETE KIT •Complete tuning and diagnostic solution • Includes Twin Scan II ABS for 01-14 models with J1850 data bus,Twin Scan 4 for 11-19 CAN data bus with 6-position DLC connector, WEGO IIID for tuning capability with both Twin Scan versions, and the Twin Scan 3 Probe Kit for use with the scopemeter feature of the Twin Scan •Communicates with ECM and BCM to read, then clear diagnostic trouble codes •Activates ABS solenoids for proper brake bleeding and testing • Ideal tuning aid for Screamin’ Eagle Pro Super Tuner (SEST), Dynojet Power Commander (PC) and Twin Tec Twin Tuner • Includes all features of the standard Twin Scan units •Real-time display of engine sensors along with built-in data logging with capability to store data for up to one hour • Included PC software analyzes logged data, then displays front and rear cylinder AFR with the required volumetric efficiency (VE) using the same RPM rows and TPS/MAP columns used in the Super Tuner tables •Includes two analog inputs with 0-20V or ±200V range as well as two-channel oscilloscope capability for waveform display PART # DESCRIPTION SUG. RETAIL 3807-0378 Complete O2 bung installation kit $885.95 3807-0439 O2 bung installation kit 399.95 3807-0398 Refill kit 68.95 •Analog inputs can also be used for air/flow ratio (AFR) • Requires use of a PC with Windows 7,Windows 8 or Windows 10 for display • Includes two Bosch LSU 4.2 wide-band oxygen sensors, two 18mm x 1.5 weld nuts, two 18mm x 1.5 hex socket plugs, USB cable,Twin Scan 3 probe kit and CD-ROM with software •Made in the U.S.A. NOTE: See page 579 of 2024 Drag Specialties FatBook for replacement weld nuts to mount O2 sensors. 3807-0378 3807-0439 PART # DESCRIPTION SUG. RETAIL 3807-0446 For 11-19 CAN bus with 6-pos DLC connector, 01-14 36-pin Delphi fuel-injected and 04-06 carbureted models w/ 12-pin module $1,709.95
RkJQdWJsaXNoZXIy OTcxOTk3