BOLD MAGENTA part numbers are new for 2025 STREET TIRES DRAGSPECIALTIES.COM TIRE & SERVICE UPDATE | 2025 STREET TIRES TIRE & SERVICE TIRE FAILURE HAZARD,WHICH IF NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS INJURY. ABOVE FOR IMPORTANT INFORMATION REGARDING PRODUCT USE. WARNING 381 BASIC TIRE INFORMATION SAFETY INFORMATION: THE FOLLOWING INFORMATION MUST BE GIVEN TO PURCHASING PERSONNEL, MOTORCYCLE TECHNICIANS, TIRE FITTERS AND CUSTOMERS. TYPICAL TIRE MARKINGS 01 Nominal section width, expressed in metric, inch or alpha; see size chart below. 02 Ratio between tire section height and nominal section width.This ratio is not indicated when section width is expressed in inches (eg. 3.50-18). 03 Code for tire construction (- = Bias, R = Radial, B = Bias Belted). 04 Nominal rim diameter size in inches. 05 “Motorcycle” in abbreviated form. Differentiates motorcycle tires and rims from those designed for other vehicles. Shown on some models only. 06 Speed symbol. Indicates the tire’s speed; see speed rating chart below. 07 Tubeless (TL) or tubetype (TT), as applicable. 08 Expresses the tire’s maximum load capacity (pounds) at the pressure indicated (psi); see load index chart below. 09 Indicates where the tire was produced. 10 Abbreviation of “US Department of Transportation.” Serves to indicate that the tire conforms to the regulations issued by The US Department of Transportation. Includes the serial # for the tire, and the last 3 or 4 numbers represent the date. Example 3805 means the tire was produced in the 38th week of 2005. 11 The arrows indicate the direction of rotation of the tire according to the fitting position (Front-rear); applicable for directional tires only. 12 Number of plies and material. 13 Tread Wear Indicator, as applicable MOTORCYCLE OFF-ROAD TIRE SIZE CONVERSION CHART METRIC FRONT TIRES METRIC INCH METRIC REAR TIRES METRIC INCH 60/100 90/80 2.50/2.75 80/100 80/90 2.50/3.60 70/100 90/80 2.75/3.00 90/100 110/90 3.60/4.10 80/100 100/80 3.00/3.25 100/100 130/80 4.00/4.50 - - - 120/100 140/80 5.00/5.10 SPEED RATING CHART J L M P Q R S T H V/VB (V)/(VB) W (W) MPH 62 74 81 93 100 106 112 118 130 149 149+ 168 168+ STREET TIRE SIZE CONVERSION CHART INCH: 2.75/3.00 3.25 3.50 3.75/4.00 4.25/4.50 5.00/5.10 5.50 6.00 METRIC: 80 90 100 110 120 130 140 150 ALPHA: MH MJ MM MN/MP MR MT MU MV LOAD INDEX CHART 47 = 386 lbs. 48 = 397 lbs. 49 = 408 lbs. 50 = 414 lbs. 51 = 430 lbs. 52 = 441 lbs. 53 = 454 lbs. 54 = 467 lbs. 55 = 481 lbs. 56 = 494 lbs. 57 = 507 lbs. 58 = 520 lbs. 59 = 536 lbs. 60 = 551 lbs. 61 = 567 lbs. 62 = 584 lbs. 63 = 600 lbs. 64 = 617 lbs. 65 = 639 lbs. 66 = 661 lbs. 67 = 677 lbs. 68 = 694 lbs. 69 = 716 lbs. 70 = 739 lbs. 71 = 761 lbs. 72 = 783 lbs. 73 = 805 lbs. 74 = 827 lbs. 75 = 853 lbs. 76 = 882 lbs. 77 = 908 lbs. 78 = 937 lbs. 79 = 963 lbs. 80 = 992 lbs. 81 = 1,019 lbs. 82 = 1,047 lbs. 83 = 1,074 lbs. 84 = 1,102 lbs. 85 = 1,135 lbs. 86 = 1,168 lbs. 87 = 1,202 lbs. SAFETY WARNINGS: WARNING Any fitment suggestions in this catalog contemplate that a product fits the selected vehicle only in manufacturer’s original configuration. If your vehicle has been modified, the product identified may not be suitable and use could result in death or serious injury. WARNING WARNING Tire failure hazard, which if not avoided, could result in death or serious injury.The load index and speed rating of your tires must meet or exceed vehicle manufacturer’s original equipment. Check your vehicle owner’s manual for tire specifications. Follow the vehicle manufacturer’s and tire manufacturer’s recommendations for tire care, maintenance, mounting, and warranty.Allow only trained personnel using proper equipment to mount tires. Tire failure hazard, which if not avoided, could result in death or serious injury.Always maintain recommended tire pressure. Underinflated tires can overheat and fail. Over inflated tires can also fail. SIZE Size may be indicated in inches, metric, or by letters (alpha).The chart shows the approximate comparison of the different size indications.
RkJQdWJsaXNoZXIy OTcxOTk3