BOLD MAGENTA part numbers are new for 2025 PARTS-UNLIMITED.COM 2025 | SNOW CHEMICALS & LUBRICANTS 852 DESCRIPTION PART # Green threadlocker 29000 THREADLOCKER GREEN •Fills voids to .005” •Penetrating grade: breakaway/ prevailing torque 65/225 in-lb. •For use with fasteners/fittings #2 to 1/2” (2.2 - 12mm) •Temperature range: -65 °F to +300 °F (-54 °C to +150 °C) •Applications include preassembled fasteners, instrument screws, carburetors, adjustment screws •Use after final parts assembly • 6ml tubes, 12 per case; sold each SIZE PART # 6ml 24200 SIZE PART # 36ml 24240 THREADLOCKER BLUE •Locks and seals while preventing parts from loosening due to vibration •Protects threads from corrosion •Medium strength: breakaway/ prevailing torque, 110/43 in-lb. •For use with fasteners/fittings 1/4” to 3/4” •Temperature range: -65°F to +300°F (-54°C to +150°C) •Applications include valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts and carburetor studs • 6ml and 36ml tubes, 12 per case; sold each 24240 24200 SIZE PART # 6ml 27100 SIZE PART # 36ml 27140 THREADLOCKER RED •High strength: breakaway/ prevailing torque 250/250 in-lb. •Replaces setscrews and snap rings •Requires no extra effort or special tool for removal •For use with fasteners/fittings 3/8” to 1” (10-25mm) •Temperature range: -65°F to +300°F (-54°C to +150°C) •Applications encompass threaded and slip-fit joints, cylinder block and rocker arm studs, ring gear bolts, strut or shock absorbers, control arm components, and various motorcycle uses. • 6ml and 36ml tubes, 12 per case; sold each 27140 27100 COLOR PART # Blue 3711-0001 COLOR PART # Red 3711-0002 GEL TWIST™ THREADLOCKERS • No drips, runs, spills or leaks •Gel stays where you want it – on the part •Applies clean and package stays clean •Great for hard-to-reach places and vertical applications •Easily portable •No mess and no waste equals time and cost savings •Available in medium-strength blue and high-strength red • .35 oz. gel tube, six per case; sold each 3711-0001 3711-0002 DESCRIPTION PART # Anaerobic gasket marker 51813 ANAEROBIC GASKET MAKER 518 •Non-corrosive gasket material designed for use on aluminum, iron and steel flanged mating surfaces •Ideal for on-the-spot and emergency repairs • Fills gaps up to .015” and cures to a solvent-resistant seal •Parts disassemble easily • 50ml tube, six per case; sold each DESCRIPTION PART # The Right-Stuff® 1 minute gasket™ 3710-0005 THE RIGHT STUFF® 1 MINUTE GASKET™ • Resistant to gear oil, transmission fluid, coolant and oil, making it ideal for use on rigid flanges and metal gaskets. •Seals instantly • Blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute • 3 oz. automatic tube (carded), six per case; sold each DESCRIPTION PART # Motoseal™ 1 gasket maker 29132 MOTOSEAL™ 1 GASKET MAKER •Seals in 20 minutes; for use on frequently disassembled engines •Resists gasoline and high temperatures while performing at low temperatures •Effective on uneven joint surfaces •Used to seal cylinder head top covers, transmission covers, crankcase halves, cam covers, exhaust manifolds, timing chain cases, cylinder case halves, side covers and clutch housings • 2.7 oz. tube, six per case; sold each DESCRIPTION PART # RTV silicone gasket maker 3710-0006 ULTRA COPPER® MAXIMUM TEMPERATURE RTV SILICONE GASKET MAKER •For high operating temperatures • The most advanced, high-temperature RTV silicone gasket available • Low odor, noncorrosive •Superior adhesion •Three times more oil-resistant than conventional silicone •Eight times more flexible than cut gasket •Temperature range: -65°F to 700°F • 3 oz. tube (carded), 12 per case; sold each
RkJQdWJsaXNoZXIy OTcxOTk3