BOLD MAGENTA part numbers are new for 2025 ATV/UTV & MOTORCYCLE PARTS-UNLIMITED.COM SNOW | 2025 ATV/UTV & MOTORCYCLE 933 UTV HEAVY-DUTY UPGRADE ACTUATOR PLATE KIT •Works with UTV push tube PART #4501-1004, sold separately •Only to be used with actuator, locking pin not included •Must reuse original hardware •Drilling required •Made in the U.S.A. PLOW ACTUATOR REPLACEMENT PARTS •Sold separately ACTUATOR BRACKETS •Actuator bracket kit for plow angle adjustment • Specifically designed for use with KFI UTV Tubes •Rotates up to full 25 degrees on both directions •Requires drilling •Made in the U.S.A. UTV PLOW TRACK EXTENSION ACTUATOR REPLACEMENT BRACKETS •Requires UTV track extension •Specifically designed for use with KFI UTV tubes and open trail tubes •Does not include the tube system (sold separately) •Does not include actuator (sold separately) •Requires drilling •Powdercoated tough •Made in the U.S.A. PLOW MOUNT 2.0 GLACIER ADAPTERS FOR POLARIS •KFI 2.0 Glacier adapters are designed to be permanently attached to the Pro 2.0 push tube (PART #4501-1004) • Keeps the plow mount off of your machine during spring, summer and fall •Improper geometry can lead to a bad blade angle and/or force being applied incorrectly •Optimal height of the standard glacier adapter (PART #4501-1127) mounting location should be 14” from the ground •Optimal height of the tall glacier adapter (PART #4501-1248) mounting location should be 17” from the ground NOTE: Designed for the “stock” full-size Polaris UTVs with the glacier bumper. Mid-size machines (unless modified) are too low to use the current glacier adapters properly. NOTE: If this mount fits on your full-size machine but you have (or are going to install) tracks, larger tires, or a lift kit, we would recommend using the alternate mount (PART #4501-1077) so that it will be compatible with our push tube leveling kits. QUICK-CONNECT WIRE HARNESS FOR POLARIS GENERAL • Consists of wires, connectors, protective sheathing, and insulation •Provides secure and reliable connections within the hydraulic actuator system •Specifically designed for use with KFI hydraulic actuator PART #4501-1126 • Complete wiring kit with Carling Technologies two-way dash rocker switch •This switch is not illuminated DESCRIPTION PART # UTV heavy-duty upgrade actuator plate kit 4501-1243 DESCRIPTION PART # Wire harness hydraulic actuator 4501-1120 Actuator bracket kit 4501-1121 Actuator shaft replacement 4501-1122 Actuator end seal 4501-1123 DESCRIPTION PART # Actuator rod end 4501-1124 Actuator motor 4501-1125 Replacement plow hydraulic actuator 4501-1126 Actuator switch rocker 4501-1128 DESCRIPTION PART # Actuator harness cap 4501-1130 Actuator 50A relay 4501-1131 DESCRIPTION PART # Standard actuator bracket 4501-1005 Track actuator bracket 4501-1175 DESCRIPTION PART # UTV plow track extension actuator replacement brackets 4501-1177 DESCRIPTION PART # Standard 2.0 glacier adapter w/ square tubes 4501-1127 DESCRIPTION PART # Tall 2.0 glacier adapter w/ square tubes 4501-1248 DESCRIPTION PART # Quick-connect wire harness 4505-1125 4501-1005 4501-1175 4501-1127 4501-1248 4501-1120 4501-1122 4501-1123 4501-1121 4501-1125 4501-1128 4501-1126 4501-1130 4501-1131 4501-1124
RkJQdWJsaXNoZXIy OTcxOTk3