BOLD MAGENTA part numbers are new for 2025 PARTS-UNLIMITED.COM 2025 | STREET LIGHTING LIGHTING 796 DESCRIPTION PART # LeverLockz™ plug-and-play LED accent kit 2120-0549 LEVERLOCKZ™ PLUG-AND-PLAY LED ACCENT LIGHT INSTALLATION KIT •Complete installation kit contains everything needed for typical installation of up to 24 two-wire, single color LED strip lights on a motorcycle CONTENTS: 1 weatherproof push-button switch with boot 12” 3M™ weatherproof double-sided tape 1/2” wide Weatherproof fuse holder 3 amp ATC fuse 1’ black wire, 18 AWG 1’ red wire, 18 AWG 10 tie wraps 2 crimp ‘n seal terminal rings 2 Cage Clamp® connectors 2 crimp ‘n seal blue butt connectors Wiring diagram and step-by-step instructions DESCRIPTION PART # Run/brake/turn conversion module 2050-0156 SMART TRIPLE PLAY® RUN/BRAKE/TURN CONVERSION MODULE FOR 12VDC MOTORCYCLES W/ 2 REAR TURN SIGNALS •Converts rear 1156/7507 turn signals to run-brake-turn •Works with LEDs or incandescent bulbs •Choice of 10 user-selectable built-in brake light strobe/flash patterns (user can also select no strobe/flash on brake) • Ability to apply brake strobe/flash patterns on brake lights only, turn signals only or both • When SMART function is turned on, strobe/flashing will be paused on turn signal when simultaneously braking and turning •10 user-selectable running light intensities allow user to match the running light brightness of turns to center taillight •Built-in short circuit protection • Load Equalizer/Signal Stabilizer required (sold separately, see page 799) • Sealed weathertight case 4.2” H x 1.4”W x 0.6” D DESCRIPTION PART # Universal 2050-0065 Heavy-duty 2050-0069 IN-LINE RESISTORS •10W/3-ohm universal in-line resistors or 20W/8.5-ohm heavy-duty in-line resistors •Work great with LED lights •Extra terminals included •Sold in pairs DESCRIPTION PART # 4-way hazard kit 2050-0118 4-WAY HAZARD KIT •Adds 4-way hazards to metric bikes •Works with LEDs or incandescent bulbs • Includes rocker switch to activate hazards, installation kit and instructions DESCRIPTION PART # Standard DOT flasher 2050-0070 STANDARD DOT FLASHER •Replaces stock 2- or 3-pin flashers on most metric bikes •Only one unit needed when replacing stock turn signals with LEDs on front and rear •Maximum 120W 2050-0069 2050-0065
RkJQdWJsaXNoZXIy OTcxOTk3