BOLD MAGENTA part numbers are new for 2025 ELECTRICAL & GAUGES PARTS-UNLIMITED.COM STREET | 2025 905 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # 0.25” QUICK DISCONNECTS Male quick disconnect for 18 to 22ga wire 2120-0579 Male quick disconnect for 14 to 16ga wire 2120-0580 Female quick disconnect for 18 to 22ga wire 2120-0581 Female quick disconnect for 14 to 16ga wire 2120-0582 RING TERMINALS For 18 to 22ga (#10) 2120-0589 For 18 to 22ga (0.25”) 2120-0590 For 14 to 16ga (#10) 2120-0592 For 14 to 16ga (0.25”) 2120-0593 HEAT SHRINK QUICK DISCONNECTS AND TERMINALS •An inexpensive way to connect wiring •Fully insulated PVC construction •Available for 14 to 22-gauge wiring •Sold in 25-packs •Made in the U.S.A. 2120-0579 2120-0582 2120-0589 2120-0593 DESCRIPTION PART # 0.25” QUICK DISCONNECTS Male quick disconnect for 18 to 22ga wire 2120-0564 Male quick disconnect for 14 to 16ga wire 2120-0565 0.25” QUICK DISCONNECTS (CONT) Female quick disconnect for 18 to 22ga wire 2120-0566 Female quick disconnect for 14 to 16ga wire 2120-0567 DESCRIPTION PART # RING TERMINALS For 18 to 22ga (#8) 2120-0573 For 18 to 22ga (#10) 2120-0574 For 18 to 22ga (0.25”) 2120-0575 RING TERMINALS (CONT) For 14 to 16ga (#8) 2120-0576 For 14 to 16ga (#10) 2120-0577 For 14 to 16 ga (0.25”) 2120-0578 QUICK DISCONNECTS AND TERMINALS •An inexpensive way to connect wiring •Fully insulated PVC construction •Available for 14 to 22-gauge wiring •Sold in 25-packs •Made in the U.S.A. 2120-0564 2120-0567 2120-0573 2120-0575 2120-0576 DESCRIPTION PART # Black Flag quick-disconnect terminals 2120-0563 BLACK FLAG QUICK-DISCONNECT TERMINALS •1/4” female quick-disconnect matches OEM that is used on rear brake switches and horns •Sold in 10-packs •Made in the U.S.A. DESCRIPTION PART # Assorted 4’ sections with 1/2”, 5/8” and 3/4” ID sizes 2120-1042 Assorted 8’ sections with 1/8”, 1/4” and 3/8” ID sizes 2120-1043 WOLVEN CLOTH SPLIT LOOM •Spring-bound wire loom •For use when heat-shrink is not an option •Easy to cut • PART #2120-1042 features 4’ sections with assorted IDs of 1/2”, 5/8” and 3/4” • PART #2120-1043 features 8’ sections with assorted IDs of 1/8”, 1/4” and 3/8” •Made in the U.S.A. DESCRIPTION PART # 5 mm x 20’ 2120-1090 8 mm x 20’ 2120-1091 12 mm x 12’ 2120-1092 DESCRIPTION PART # 19 mm x 10’ 2120-1093 25 mm x 10’ 2120-1094 EASY LOOM™ SPLIT WIRE SLEEVES • A clean classy way to protect exposed wire, hoses and cables •Adds a higher level of protection compared to simple plastic tubing • Protects against abrasion, chemicals and the elements •Easy to install with the split design •Rated up to 347 °F •Made in the U.S.A. 2120-1090 2120-1042 DIAMETER PART # 3/16” 2120-0912 5/16” 2120-0913 DIAMETER PART # 1/2” 2120-0914 ADHESIVE-LINED HEAT SHRINK •Keep splices dry •Heavily walled and adhesive lined •Works well for battery lugs or aftermarket ignition switch terminals • Comes in 4’ length tubes •Sold in pairs •Made in the U.S.A. 2120-0912 2120-0913 2120-0914
RkJQdWJsaXNoZXIy OTcxOTk3