BOLD MAGENTA part numbers are new for 2026 PARTS-UNLIMITED.COM 2026 | SNOW TOOLS & HARDWARE 750 DESCRIPTION PART # Brake caliper piston tool 3808-0017 BRAKE CALIPER PISTON TOOL •Ultra low-profile design removes pistons from monoblock disc brake calipers •Fits pistons with a center bore of 14 mm to 28 mm •Easy-to-use single locking screw • Works on aluminum, steel and titanium pistons •Non-marring design will not harm pistons or caliper •Billet aluminum and stainless steel construction •Durable blue anodized finish DESCRIPTION PART # 4.0 mm 3801-0211 4.5 mm 3801-0212 5.0 mm 3801-0213 DESCRIPTION PART # 5.5 mm 3810-0046 4 pc. set (4.0 mm, 4.5 mm, 5.0 mm and 5.5 mm) 3810-0047 VALVE SEAL INSTALL TOOLS •Properly aligns valve stem seal to valve guide so seal snaps on straight every time •Holds four valve guide seals at one time for quick and easy installation on multi-valve cylinders •Contoured design in bottom of handle cradles and protects the delicate inner lip of the valve stem seal while directing tool force to the sturdy outer rim •Slim profile allows easy access to valve guides even on modern compact heads with deep lifter bores •Rounded tip will not damage inner lip of valve stem seal or valve guide bore •Anodized aluminum handles with stainless steel pilot shafts SIZE PART # 4 mm 3801-0217 4.5 mm 3801-0218 5 mm 3801-0219 5.5 mm 3801-0220 SIZE PART # 7 mm 3801-0221 5/16” 3801-0222 3/8” 3801-0223 VALVE GUIDE BALL HONES •Durable enough to size C630 bronze and cast iron valve guide materials •Available from 4 mm up to 3/8” widths •Sold each •Made in the U.S.A. DESCRIPTION PART # Feeler gauge set 3801-0174 FEELER GAUGE SET •Feeler gauge holder cures the need to use bulky multi-feeler gauge tools while performing valve adjustments •Angle and reach of tool is ideal for reaching into tight areas or around corners, which is often necessary for proper valve adjustment •Just pick the gauge insert you need and install it in the tool holder •Tool includes two gauge holders and the following size gauge inserts: 0.002”, 0.003”, 0.004”, 0.005”, 0.006”, 0.008”, 0.009”, 0.010” and 0.011” •Made in the U.S.A. DESCRIPTION PART # 3-in-1 truing stand 35-9573 3-IN-1 TRUING STAND •Check cranks for runout and fork tubes for straightness •Also use to true spoke wheels and balance spoke and cast wheels • 11” between balance points •Handles crankshafts up to 11” between centers, rims up to 21” •Dial indicator not included; available separately 3801-0223 3810-0047
RkJQdWJsaXNoZXIy OTcxOTk3