BOLD MAGENTA part numbers are new for 2026 ENGINE PARTS-UNLIMITED.COM STREET | 2026 ENGINE 1363 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # 1/32” (0.032”) T x 14.5”W x 30” L 0934-4769 DESCRIPTION PART # 3/20” (0.15”) T x 14.5”W x 30” L 0934-7175 DESCRIPTION PART # 31/50” (0.62”) T x 14.5”W x 30” L 0934-7176 PREMIUM GASKET MATERIAL •Multi-purpose seal for all powersports applications including oil, fuel, water, coolant and exhaust mounts •Made from aramid and other synthetic fibers compressed with Nitrile Butadiene Rubber (NBR) binder • Resists oils, solvents, mild acids, alkalis, gasses, water and low-pressure steam •Service conditions up to 750 °F •Available in light green •Sold each DESCRIPTION PART # Green (1/64”) (0.015” mm) thick) 0934-6977 DESCRIPTION PART # Blue (1/16”) (0.062” mm) thick) 0934-6978 POWERSPORTS ALL-GASKET • Comes with two sheets of gasket material – 11.5”W x 15.5” L • Material is premium compressed sheet, manufactured with aramid and other synthetic fibers and uses an NBR (Nitrile Butadiene Rubber) binder • Flexible, easy to use, trace and cut with scissors or razor knife • Resistant to: oils, solvents, fuels, mild acids and alkalis, water, low-pressure steam, air and other gases DESCRIPTION PART # 6” x 6” (7 sheets) 0934-6883 6” x 6” (7 sheets) 0934-68872 8” x 8” (5 sheets) 0934-6884 DESCRIPTION PART # 8” x 8” (7 sheets) 0934-6885 12” x 18” (3 sheets) 0934-68861 1 Withstands temperatures of up to 400 °F. 2 Withstands temperatures of up to 1,200 °F. UNIVERSAL GASKET KITS •Designed to seal perfect surfaces •Outperforms OEM material on imperfect surfaces •Made in the U.S.A. 0934-6977 0934-6978 • Recommended applications to seal: engine case side covers, valve covers, base and cylinder, transmissions, drive line components, water pumps, thermostats, fuel pumps, oil line and hose flanges •Also have favorable properties for high heat insulation and exhaust mount insulation •Service conditions up to 750 °F 0934-6886 0934-6883 0934-4769
RkJQdWJsaXNoZXIy OTcxOTk3