BOLD MAGENTA part numbers are new for 2026 FUEL/AIR SYSTEMS PARTS-UNLIMITED.COM STREET | 2026 FUEL/AIR SYSTEMS 1559 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. FUEL LINE OVERALL LENGTH FILTER BODY LENGTH FILTER BODY DIA. INLET/OUTLET DIA. FILTRATION NUMBERS PART # 1/4” 43 mm 22 mm - 8 mm 65-100 microns 0707-00401 1/4” 52 mm 25 mm 22 mm 7 mm 40-70 microns 0707-00171 1/4” 52 mm 32 mm 20 mm 6 mm 125 microns 0707-00301 5/16” 44 mm 13 mm 39 mm 8 mm 60 microns 0707-0031 1 This filter has oversized barb fittings that allow use with 1/4” ID hose and 5/16” hose. Clamps should be used with 5/16” ID hose. FUEL FILTERS •In line fuel filters for 1/4” and 5/16” ID fuel line •PART #0707-0017 1/4” clear cone shaped with bronze element •PART #0707-0030 1/4” clear cone shaped with a polyester screen element •PART #0707-0040 1/4” clear cone shaped with bronze element and 90 degree elbow •PART #0707-0031 5/16” clear thin wafer shape with stainless screen element •Sonic-welded housing •Safe for all fuels 0707-0040 0707-0017 0707-0030 0707-0031 DESCRIPTION FUEL LINE OVERALL LENGTH ELEMENT FILTRATION MICRONS GRAVITY FLOW RATE ML/M IN. PART # Large volume 6 mm 1/4” 2 3/8” Paper 70 470 0707-0066 Slim 6 mm 1/4” 2” Bronze 40 400 0707-0067 Large 8 mm 5/16” 1 3/4” Stainless steel 100 800 0707-0064 Slim 90 6 mm 1/4” 2 3/8” Plastic 40 560 0707-0065 FUEL FILTERS •Universal in-line fuel filters for 1/4” and 5/16” ID fuel lines •Designed for low pressure fuel filter lines • Compatible with standard, Race and E85 fuels •Sold to dealer as a display card of 20; sold to consumer as each 0707-0067 0707-0064 0707-0065 0707-0066 DESCRIPTION PART # Fuel filter 0707-0046 FUEL FILTER •Universal in-line fuel filter for 1/4” flange •Body diameter of 5/8” with an overall length of 2 1/8” •Brass element filter for better filtration •Easy to clean with backflushing •Designed for low-pressure fuel filter line DESCRIPTION PART # Jumbo fuel filter 707 JUMBO-TYPE FILTER •For use with 1/4” to 5/16” fuel lines •Overall length 4” DESCRIPTION PART # Clear fuel filter 700A CLEAR FILTER •A greatly improved filter with increased fuel flow •3 1/8” L for 3/16” to 1/4” fuel line FUEL LINE BODY LENGTH BETWEEN HOSES DIAMETER PART # 1/4” ID 1” 1.3” 0707-0036 1/4” ID 1.625” 0.875” 0707-0003 1/4” ID 2” 0.88” 701C 1/4” ID 3” 1.19” 704C FUEL LINE BODY LENGTH BETWEEN HOSES DIAMETER PART # 3/16” ID 0.5” 1.125” 901C 5/16” ID 1” 1.5” 601C 1/4” ID or 5/16” ID 3.558” 1.625” 0707-00091 1 Display card of 8. IN-LINE FUEL FILTERS •Available in sizes to fit 1/4”, 3/16” and 5/16” (6 to 7 mm) fuel lines •High-impact nylon housings •Sonically welded for no-leak, no-break performance •PART #0707-0003 operates 90° in-out to save space in very close applications where a normal straight in-line filter would not work •Sold as a display card of 20 except PART #0707-0009 which is sold in a display card of 8; sold to consumer as each 0707-0003 0707-0009 0707-0036 601C 704C 701C 901C DESCRIPTION PART # High-flow in-line fuel filter 861C HIGH-FLOW IN-LINE FILTERS •Fit 1/4” fuel lines •High-impact nylon housings •Sonically welded for no-leak, no-break performance •Gravity flow rate of 7.6 gal/ hr. compared to typical in-line filters with 2 to 4.5 gal/hr. •Sold per display card of 20; sold to consumer as each
RkJQdWJsaXNoZXIy OTcxOTk3