BOLD MAGENTA part numbers are new for 2026 PARTS-UNLIMITED.COM 2026 | STREET LIGHTING LIGHTING 772 DESCRIPTION PART # LeverLockz™ plug-and-play LED accent kit 2120-0549 LEVERLOCKZ™ PLUG-AND-PLAY LED ACCENT LIGHT INSTALLATION KIT •Complete installation kit contains everything needed for typical installation of up to 24 two-wire, single color LED strip lights on a motorcycle • Includes on/off switch, 12” of 1/2” wide double-sided tape, weatherproof fuse holder, 3-amp ATC fuse, 1’ black 18 AWG wire, 1’ red 18 AWG wire, 10 tie wraps, two crimp ‘n seal terminal rings, two Cage Clamp® connectors, two crimp ‘n seal blue butt connectors, wiring diagram and step-by-step instructions DESCRIPTION PART # Smart Triple Play® run/brake/turn conversion module 2050-0156 SMART TRIPLE PLAY® RUN/BRAKE/TURN CONVERSION MODULE FOR 12VDC MOTORCYCLES W/ 2 REAR TURN SIGNALS •Converts rear 1156/7507 turn signals to run-brake-turn •Works with LEDs or incandescent bulbs •Choice of 10 user-selectable built-in brake light strobe/flash patterns (user can also select no strobe/flash on brake) • Ability to apply brake strobe/flash patterns on brake lights only, turn signals only or both • When SMART function is turned on, strobe/flashing will be paused on turn signal when simultaneously braking and turning •10 user-selectable running light intensities allow user to match the running light brightness of turns to center taillight •Built-in short circuit protection •Load Equalizer/Signal Stabilizer required (sold separately) • Sealed weathertight case dimensions: 4.2” H x 1.4”W x 0.6” D DESCRIPTION PART # Heavy-duty 2050-0069 Universal 2050-0065 IN-LINE RESISTORS •10W/3-ohm universal in-line resistors or 20W/8.5-ohm heavy-duty in-line resistors •Work great with LED lights •Extra terminals included •Sold in pairs DESCRIPTION PART # 4-way hazard kit 2050-0118 4-WAY HAZARD KIT •Adds 4-way hazards to metric bikes •Works with LEDs or incandescent bulbs • Includes rocker switch to activate hazards, installation kit and instructions 2050-0069 2050-0065 DESCRIPTION PART # Standard DOT flasher 2050-0070 STANDARD DOT FLASHER •Replaces stock 2- or 3-pin flashers on most metric bikes •Only one unit needed when replacing stock turn signals with LEDs on front and rear •Maximum 120W
RkJQdWJsaXNoZXIy OTcxOTk3