BOLD MAGENTA part numbers are new for 2026 PARTS-UNLIMITED.COM 2026 | WATERCRAFT CHEMICALS & LUBES CHEMICALS & LUBES 216 DESCRIPTION PART # RL-700 DOT 4 brake fluid 3703-0079 RL-700 DOT 4 BRAKE FLUID •Typical Dry Boiling Point: 635 °F (335 °C) •Typical Wet Boiling Point: 401 °F (205 °C) •Specially formulated to provide the highest performance under racing conditions where braking systems operate at very high temperatures • For best results, bleed the braking system with fresh fluid before each race, specifically if the brakes are excessively hot and/ or the conditions are humid •RL-700 conforms to and exceeds U.S FMVSS No.116 DOT 4 •16.9 fl oz.; sold each NOTE: Do not mix with other brake fluids, otherwise outstanding performance may be compromised. DESCRIPTION PART # Supercool® Extreme 3705-0051 SUPERCOOL® EXTREME •Formerly known as Supercool® With WaterWetter® • Convenient, pre-mixed coolant for motorcycles, ATVs, karts etc. • Blended with purified, deionized water and proper WaterWetter percentage • Reduces rust, corrosion and electrolysis, cleans and lubricates water pump seals •Compatible with all antifreeze and coolant •Contains no ethylene glycol •Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes • 64 fl oz. jug, sold each DESCRIPTION PART # Watterwetter® 3705-0050 WATERWETTER® •Unique agent for cooling systems that doubles the wetting ability of water •Rust and corrosion protection allows for use of straight water in racing or reduced antifreeze levels in warm climates •Small cooling systems should use 1 oz. (3 to 4 capfuls) per qt. •Compatible with new or used antifreeze (including DEX-COOL® and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems •Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes •Contains no ethylene glycol • 12 oz. bottle, sold each DESCRIPTION PART # 14 oz. jar 3607-0065 DESCRIPTION PART # 14 oz. tube 3607-0066 CV-2 GREASE W/ MOLY •Outperforms the best conventional or synthetic greases and lubes •Withstands extreme temperature and pressure in wheel bearings, U-joints and high-angle CV Joints • Excellent high-temp stability, extreme-pressure protection and water resistance •Used in a variety of applications with operating temps from -100 to 500 °F •Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals •Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment •Synthetic fluidity allows increases in bearing life up to 200% • Available in 14 oz. jar; 4 per case, sold each or 14 oz tube; 6 per case, sold each NOTE: Will darken after high-temp use; not detrimental to performance. DESCRIPTION PART # 4 oz. tub 3607-0063 DESCRIPTION PART # 12 oz. bottle 3607-0067 DESCRIPTION PART # 16 oz. tub 3607-0064 ASSEMBLY LUBE •Prepares potential wear surface and prevents metal contact before adequate lubrication can be supplied • Unlike other assembly lubes, Red Line’s will not plug filters after initial engine start-up •Provides 3x greater film strength than conventional black Molybdenum Disulfide greases • Excellent rust and corrosion inhibitor, allows for long-term storage • For use on camshafts, lifters, pushrods, piston skirts, bolt threads, main and rod bearings •Do not use on exhaust bolts or other high temperature bolts which require an anti-seize •Recommended and used by top camshaft and drivetrain manufacturers • Available in tub of grease (4 oz.) 12 per case, sold each; (16 oz.) 4 per case, sold each or bottle of liquid lube (12 oz.); 6 per case, sold each 3607-0064 3607-0067 3607-0066 3607-0065
RkJQdWJsaXNoZXIy OTcxOTk3