BOLD MAGENTA part numbers are new for 2025 PARTS-UNLIMITED.COM 2025 | OFFROAD FUEL/AIR SYSTEMS FUEL/AIR SYSTEMS 1586 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # 3’ LENGTH 1/4” 0706-0371 5/16” 0706-0373 DESCRIPTION PART # 3’ LENGTH (CONT) 3/8” 0706-0375 DESCRIPTION PART # 10’ LENGTH 1/4” 0706-0372 5/16” 0706-0374 DESCRIPTION PART # 10’ LENGTH (CONT) 3/8” 0706-0376 DESCRIPTION PART # 25’ LENGTH 1/4” 0706-0421 5/16” 0706-0427 DESCRIPTION PART # 25’ LENGTH (CONT) 3/8” 0706-0422 BLACK F.I. FUEL LINES •Multi-layer rubber extension •Safe for use with any fuel or blend containing up to 100% ethanol/m ethanol •SAE 30R9 (fuel injection rated) •Maintains OEM look and performance •Do not submerse in gasoline •Made in the U.S.A. NOTE: Exempt per CARB Executive Order (E.O.) #C-U-05-002. NOTE: EPA-15. DESCRIPTION BLUE CLEAR GREEN RED YELLOW 1/4” ID x 3/8” OD x 3’ L 0706-0277 0706-0189 0706-0271 0706-0265 0706-0283 1/4” ID x 3/8” OD x 10’ L 0706-0278 0706-0262 0706-0272 0706-0266 0706-0284 5/16” ID x 0.473” OD x 3’ L 0706-0279 0706-0191 0706-0273 0706-0267 0706-0285 5/16” ID x 0.473” OD x 10’ L 0706-0280 0706-0263 0706-0274 0706-0268 0706-0286 3/8” ID x 9/16” OD x 3’ L 0706-0281 0706-0193 0706-0275 0706-0269 0706-0287 3/8” ID x 9/16” OD x 10’ L 0706-0282 0706-0264 0706-0276 0706-0270 0706-0288 HIGH-PRESSURE FUEL LINES •Premium transparent polyurethane tubing • 85 durometer provides superior abrasion, kink, tear, oxidation and chemical resistance • Includes a very strong nylon inner band, yet remains flexible •Operating temperature -40 °F to 155 °F; melting temperature 370 °F •Withstands up to 200 psi •Made in the U.S.A. NOTE: Do not use with fuel containing more than 10% alcohol. DESCRIPTION PART # 1/4” x 18” L 0706-0413 1/4” x 3’ L 0706-0414 1/4” x 10’ L 0706-0415 DESCRIPTION PART # 1/4” x 25’ L 0706-0416 5/16”Wx18”L 0706-0428 5/16”Wx3’L 0706-0429 DESCRIPTION PART # 5/16”Wx10’L 0706-0430 5/16” x 25’ L 0706-0431 TRI-LAYER SUBMERSIBLE FUEL LINES • Semi-rigid tubing with a thin nylon layer, polyurethane middle layer and a thin nylon inner layer which allows more maximum space efficiency compared to other submersible tubing •Very high chemical resistance to withstand almost any chemical exposure, especially fuels and oils •Can be used for other fuel line applications including fuel injection and with fuel containing alcohol •Available in translucent white •Made in the U.S.A. DESCRIPTION PART # 1/4”Wx3’L 0706-0418 5/16”Wx3’L 0706-0424 1/4”Wx10’L 0706-0419 5/16”Wx10’L 0706-0425 DESCRIPTION PART # 1/4”Wx18”L 0706-0417 5/16”Wx18”L 0706-0423 1/4”Wx25’L 0706-0420 5/16”Wx25’L 0706-0426 SUBMERSIBLE RUBBER FUEL LINES •Flexible multi-layer rubber extrusion meets SAE 30R10/EPA/CARB specifications for submersive fuel line •Can be used for other fuel line applications including fuel injection, and fuel containing alcohol •Available in black DESCRIPTION BLACK OPAQUE/SOLID BLUE OPAQUE/SOLID GREEN OPAQUE/SOLID ORANGE OPAQUE/SOLID RED OPAQUE/SOLID YELLOW 10’ LENGTH (CONT) 1/4” ID x 3/8” OD - - - - - 0706-0504 0.312” ID x 0.473 OD 0706-0617 0706-0615 0706-0613 - 0706-0609 0706-0611 0.375” ID x 0.532” OD 0706-0591 0706-0589 0706-0586 - 0706-0582 0706-0584 25’ LENGTH 0.080 ID x 0.140” OD - - - 0706-0472 - - 0.09” ID x 0.18” OD - - - 0706-0490 - - 0.13” ID x 0.25” OD 0706-0540 0706-0537 0706-0535 0706-0541 0706-0531 0706-0533 3/16” ID X 5/16” OD 0706-0568 0706-0565 0706-0563 0706-0569 0706-0559 0706-0561 0.25 ID x 0.37” OD 0706-0523 0706-0519 0706-0517 0706-0524 0706-0513 0706-0515 0.312” ID x 0.473” 0706-0629 0706-0625 0706-0623 - 0706-0619 0706-0621 0.375” ID x 0.532” OD 0706-0602 0706-0599 0706-0597 - 0706-0592 0706-0595 FUEL LINES (CONT) 0706-0413 0706-0371 0706-0417 0706-0262 0706-0265 0706-0271 0706-0277 0706-0283 OPAQUE/SOLID (CONT)
RkJQdWJsaXNoZXIy OTcxOTk3