BOLD MAGENTA part numbers are new for 2026 SERVICE & MAINTENANCE TOOLS DRAGSPECIALTIES.COM TIRE & SERVICE | 2026 SERVICE & MAINTENANCE TOOLS 637 DESCRIPTION PART # Two-piece retaining ring plier set 3801-0205 TWO-PIECE RETAINING RING PLIERS SET •Contains two Quick Switch (internal/external) interchangeable tip pliers •First set of pliers works on internal ring sizes of 1/4” to 1” (7 mm to 26 mm) and external rings 1/8” to 1” (3 mm to 26 mm) •Other set works on internal sizes of 3/8” to 2” (10 mm to 51 mm) and external sizes of 1/4” to 2” (7 mm to 51 mm) •Each pliers comes with five pairs of color-coded interchangeable tips (20 total) •Packaged in routed foam for easy storage •Made in the U.S.A. DESCRIPTION PART # Plier snap ring set 3850-0319 6-PIECE SNAP RING PLIERS SET •Internal/external fixed-tip pliers •Includes most popular sizes in straight, offset and 90° •Packed in blow-molded case •Made in the U.S.A. DESCRIPTION PART # Snap ring tool 3808-0019 SNAP RING TOOL •Removal of internal snap rings used on hydraulic master cylinders •Right angle allows up to 50 mm deep in reach •Can also be used on fork seal retaining rings DESCRIPTION PART # Internal snap-ring pliers 3808-0002 INTERNAL SNAP-RING PLIERS •Allow removal of internal snap rings used in hydraulic master cylinders •Can be used to remove and replace small to medium internal snap rings up to 50 mm deep, including those used for transmission gear locating, bearing retention, and oil seal retention •Applicable to some fork seal retaining rings DESCRIPTION PART # Snap ring pliers MP08-0186 SNAP RING PLIERS •Economical pliers easily work with both inside- and outside-opening snap rings or clips •Includes three extra sets of tips: one additional straight tip and two offset or angle tips DESCRIPTION PART # Side jaw pincer tool 3801-0182 SIDE JAW PINCER TOOL •Used to install O-clips or Stepless® clamps •Designed for use where space is restricted DESCRIPTION PART # Ear clamp pliers 3801-0373 EAR CLAMP PLIERS •Designed for simple and reliable mounting of single ear and double ear clamps •Side jaw design allows you to easily clamp at a 90° angle in a limited space •Slim jaw allows the ear clamps to be tightened safely without damage •Overall length: 8 11/16” DESCRIPTION PART # Body rivet pliers tool 3850-0611 BODY RIVET PLIERS TOOL •Universal tool to pull the heads of the plastic rivets makes removal a snap •The narrow hooked teeth grab the plastic head and pull it up with ease DESCRIPTION PART # Rivet pliers 3850-0608 PLASTIC RIVET PLIERS •Designed to pull up rivet head easily without damage to the head •Works on all RZR plastic rivets •Quit destroying the plastic rivets by using a screwdriver or other tool to remove them DESCRIPTION PART # Fairing removal pry tool 3850-0494 FAIRING REMOVAL PRY TOOL •Special v-shaped notch and slim design to help easily remove a motorcycle fairing or extract plastic fasteners •Made of impact resistant plastic to prevent scratches or damage to metal and painted surfaces •Length: 200 mm (7 7/8”)
RkJQdWJsaXNoZXIy OTcxOTk3